hls30.com

Tomohawk, there is, but it does not function unless the limit circuit fails, or something interferes with the movement of the antenna. Will

Jim, It IS something else... Will

the only thing an auto antenna has that a semi auto doesnt is a timer/limit circuit(the auto antenna cuts off when it hist fully opend or fully closed, the Semi automatic runs until you let loose for the switch(no built in end of travel recognition) If you can find the limit switch/circuit, you can modify it. Will

The base on my original knob is chrome plated plastic(the chrome is peeling). It look just like yours(the one on the left). If it weren't peeling , I would have sworn it was metal. Will

I used one on my 280Z for years, and replaced it every couple/three years, If you are careful when lacing them up, they look good, but it is obvious they are a generic answer-If you really want a leather steering wheel, get with LBO730, he has got the thing down! Will

Welcome to my nightmare! Will

Please Post Pictures, interior, exterior, etc... WIll

Very sharp for what you have in it! Looks better than it cost! Now for the real tests, time, heat, and UV. You are in agood spot for all three! Will

you got me there! What has Daddy given the dime? Will

Now that I know what is what, I'll have a go at takeing the Plastic 4spd emblem off to see aour rstoration. Will

Try HybridZ, most members here are into some degree of purity in their cars-that is to say the cars are mostly or completely original. Will

Thanks! Will

6lbs give or take stock, about 10 will require an intercooler or retarded timing to keep detonation away-but the stok turbo can go to 14 or so. The damage will not be to the turbo, but more probably to the pistons and or rings. Will

This pic has four of the emblems I have seen in Zs, If I the 4spd is stock '69-'73, but what I have seen most often in S30s the red 5spd emblem on the wooden knob with the 4spd emblem on it. Will

A picture would help with your great part number and availability info! Will

Be sure the tires you get are USA DOT approved-or you will not want the fines or impound that could happen depending on local intrepretation of your intent(especially with importing the tires...) Not to mention they might not make it through customs without DOT approval. Will

Victor, With all of that I have only one question. . . . . . . . . . . Why are you sitting in front of a keyboard? Will

I would think that pinting a suitable sticker on a high res laser printer then casting a urethane bubble over it would take care of it. Cant be a tough as restoring a fired enamel version. Wll

I just went to Courtesy Nissan and looked-obviously I have been considering after market cloisinee emblems as OEM, the two I have must be oem knob with and aftermarket emblem. I'll still try to find them... Will

That would be interesting! Will

While I look for mine, someone post a pic of theirs, maybe I have it wrong-I've never bought a shift knob from th dealer, and it could well be that all I have seen is aftermarket versions... Will

Tomohawk, Who wants cold rust! Get that water(frozen or not) outa that Z! Will

Arne, All of the original knobs I have ever seen had metal emblems. But, it can be replaced if you ca find one, Try "E's Miracles" for restoration-I think the website you (or someone up there) we selling cars on had a link... Will PS, no pic to see the damage?

Carl, I have a set of Tokico HPs, the rears are not mounted, the fronts are(but the front suspension isn't) so... Front HZ3015 8 & 5/8" (not a direct measurement) Rear HZ3016 8 & 3/8" Will

Victor, I would have thought your vote would have been... "You just don't have a clue it is the ...lack of an imported beer cooler!" Will