Jump to content
Remove Ads

jfa.series1

Subscriber
  • Joined

  • Last visited

Everything posted by jfa.series1

  1. View Advert Used 240Z Door Lock Mechanism – RH Here’s a used (NLA) right side door lock mechanism for a 240Z. The price is $100, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. Sorry, no used LH available. Advertiser jfa.series1 Date 04/19/2019 Price $100.00 Category Parts for Sale
  2. View Advert NOS 240Z Door Lock Mechanism – RH Here’s a NOS & NLA right side door lock mechanism for a 240Z. The price is $200, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. I also have a left side unit, also NOS/NLA in a separate ad. Both units are available as a package for $350. Advertiser jfa.series1 Date 04/19/2019 Price $200.00 Category Parts for Sale
  3. View Advert NOS 240Z Door Lock Mechanism – LH Here’s a NOS & NLA left side door lock mechanism for a 240Z. The price is $200, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. I also have a right side unit, also NOS/NLA in a separate ad. Both units are available as a package for $350. Advertiser jfa.series1 Date 04/19/2019 Price $200.00 Category Parts for Sale
  4. Dang - how much money did I leave on the table? Just kidding. Unlike some eBay sellers working to get max money out of tired parts, I hope to offer refurbed or lightly used parts at a reasonable price to fellow enthusiasts and keep these old cars looking good.
  5. View Advert 1970-72 240Z Steering Column Clamshell Set This is a 98% concours-quality steering column clamshell set for a 1970-72 240Z, Nissan P/N 48470E4601. The tiny pins that locate the two halves are undamaged and intact. The parts are not warped and fit together perfectly. There is a slight abrasion on the top section where it fits under the speedometer (fourth picture), not visible when installed. There are a couple of slight marks on the lower section near the ignition switch, likely from a key - the marks are difficult to see. The fasteners are not included. This item may also fit the ’73 240Z but the parts catalog shows a superseded P/N for that year. The price is $100 and includes standard domestic shipping, international shipping available at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 04/17/2019 Price $100.00 Category Parts for Sale
  6. Hello Clay, Yes - I recalled that we had connected a while back. Thanks for refreshing me on the details. I'm looking forward to watching your progress now that the car is back from paint - assembly is going to be so much fun! Jim
  7. Awesome work, Clay. Your patience and determination are really paying off.
  8. A buddy is looking for sources for 240Z bumper trim. I've located one source at Z Car Depot (link below), any other leads? Thanks. https://zcardepot.com/collections/exterior/products/bumper-rubber-trim-moulding-240z#
  9. Great minds and all that jazz... I too used small "O" rings to seal each of the six bolts when reinstalling my spoiler.
  10. I don't recall my wheel ever being as light-colored as in the brochures - it was more of a reddish color. Certainly not as light as the shifter knob. I noticed a clock-delete in one of your pics, not visible in any others.
  11. I just got a new Car and Driver mag, there's an article about driving a 2018 Alpine A110 (mid-engine, RWD, 2 passenger coupe) in the French Alps. A paragraph at the end caught my eye - see if you get the same chuckle as I did. " While the A110 almost certainly won't be sold in the U.S., we can at least fantasize that it could. Europe's crash and emissions standards are close enough to ours these days to mean a federally compliant version could be possible. Distribution would be more of a challenge, but Alpine is technically a separate brand from Renault. It could sell the A110 out of the back of a few well-chosen Nissan franchises - or just go ahead and put Z badges on it..."
  12. As to color of light unit, I'm also in the camp of same as the rear finisher. I believe the metal inserts in the lights are intended as a diffuser for the light and avoid a light "hot spot" on the license plate as well as diffuse some of the heat from the bulb away from the lens.
  13. Dan - Here's the update on the Molotow Chrome Pens: I thoroughly cleaned the lettering area at the top left with rubbing alcohol and a q-tip, most of the silver Sharpie and any prior chrome came off. Used the 1mm pen to cover the text. Cleaned the rest of the plate - note the silver Sharpie did not come off the long lines. Finished the text at top right with the 1mm pen and the long lines with the 2mm pen. I'm well pleased with the outcome - a very shiny chrome finish. I highly recommend this product, will be using it to update other areas in my car! Jim
  14. That's a very nice looking car and looks to be an excellent value. The ZX series is very much under-appreciated.
  15. Yep - a nice collectable piece, will require a unique display to show off both sides. I noted that the back side pics were all badgeless cars, not so on the front.
  16. My recollection of the exhaust manifold on my car was no finish - just bare casting (that quickly rusted!). I have heat shields from both pre-heat riser and post-heat riser. They appear to be clear zinc finish.
  17. View Advert NOS 240Z Window Regulator - RH NOS/NLA right-hand window regulator for 240Z. Nylon rollers and soft washers intact. $200, shipping extra at actual cost. Payment via PayPal, PM if interested. Note: I also have a left-hand NOS regulator listed. I will sell the LH and RH regulators as a package for $325, shipping extra at actual cost. Advertiser jfa.series1 Date 03/12/2019 Price $200.00 Category Parts for Sale
  18. View Advert NOS 240Z Window Regulator - LH NOS/NLA left-hand window regulator for 240Z. One nylon roller is broken, the soft nylon washers at each roller are missing. $175, shipping extra at actual cost. Payment via PayPal, PM if interested. Note: I also have a right-hand NOS regulator listed. I will sell the LH and RH regulators as a package for $325, shipping extra at actual cost. Advertiser jfa.series1 Date 03/12/2019 Price $175.00 Category Parts for Sale
  19. View Advert NOS 240Z Heater Control Assembly NOS/NLA heater control assembly for 240Z. $50, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 03/12/2019 Price $50.00 Category Parts for Sale
  20. Since you are in Houston, check out the folks at SZRpro, formerly Houston Z Auto. They are very knowledgeable and well regarded on both platforms and can give you some real appreciation of what you might be facing with either choice. The S30 series is vastly more simple when compared to the sophistication and complexity of the Z32. Good luck with your education.
  21. View Advert 240Z Fan Pulley 240Z fan pulley (may fit other S30's), stripped and professionally replated in yellow zinc. $25, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 03/11/2019 Price $25.00 Category Parts for Sale
  22. View Advert NOS Hand Brake Center Arm S30 NOS/NLA hand brake center arm. $75, shipping extra at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 03/11/2019 Price $75.00 Category Parts for Sale
  23. View Advert S30 Console Ashtray Cup Stripped and professionally replated in clear zinc, no pitting, chrome fittings are in near perfect condition. $60, includes standard domestic shipping. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 03/11/2019 Price $60.00 Category Parts for Sale
  24. If you are looking for a total replacement, check out John Taddonio on FB - he has a complete roof with windshield posts available for local pickup in NY.
  25. View Advert Refurbished Kyosandenki Fuel Pump A completely refurbished Kyosandenki fuel pump, original equipment on many 240Z' and 260Z's. The pump was disassembled and cleaned, all fittings stripped and professionally replated. It also features a unique chromed cap. The oil seal and diaphragm are in perfect condition, valves checked for proper operation. This one is perfect for a stock restoration or a blinged-up restomod. $225, shipping is extra at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 03/11/2019 Price $225.00 Category Parts for Sale
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.