Zed Head

Did you try the solutions offered in the document?

Just read that Canada's borders are closing to individual travel. Commerce will continue though.

2,000 people have died in Italy. If we follow Italy's path, we'll be over 10,000 dead, at least, just comparing population size.

That's a good point. It might actually be that the process of torquing the nuts (they're not really jam nuts, just nuts) is what causes the distortion of the spindle pin at the lock-pin hole.

You like the UK's herd-thinning approach? Maybe COVID-19 is actually a government (world government) plan to reduce the burden on society of an aging population.

https://www.businessinsider.com/coronavirus-death-rate-south-korea-compared-to-flu-2020-3 motorman does have a point about the media though. They tend to pick and choose their data to project a view. In this article they use the US flu rate and the South Korea COVID-19 rate. Why not use the South Korea flu rate? Who knows. Big picture wise, it's hard to imagine that the whole world and every state in the US has been suckered in to drastic measures by the media's use of percentages. Could be though. The last three years are telling.

This is a weird comment. Percentages are one of the most effective ways to describe large numbers. And odd that an "engineer" would ignore or not understand exponential growth, or even how any person wouldn't understand how disease spreads. It starts small and grows. It's not a constant like automobile deaths or addiction. But, that's today's world. Many "experts" sowing confusion. If society can get ahead of the growth fewer people will die. If they sit back and say it's a hoax and it will pass, more people will die by the time it's over. The math shows that.

The fact that it's new and undefined is the key. If you read around about past epidemics you'll find some that faded away and some that were very bad. But they can't be predicted. Ebola is the last big one, and, apparently, because we were prepared, it never took hold in the rest of the world. I think that the bigger fear is that eventually one will come along that really is very deadly. This one is a practice run, and we're failing in controlling it. It should be easy, supposedly we're the most sophisticated most powerful nation in the world.. And you're looking at after-the-fact numbers. Besides that, what do you tell the families of the 42 people that died in Washington? After scientists in Washington had identified the disease but the CDC told them to stop testing. The consistent failures make you wonder what else could go wrong. I think that's what much of the fuss is about. And if you have relatives over 65 then you worry about the overall healthcare system failing them and letting them get ill. If you just don't care about people over 65 then I guess you'll be okay with whatever happens. Take off your engineer hat and see what comes in to your head. Edit - actually just realized that you used absolute numbers instead of percentages. C'mon, you're an engineer! You know better. Do the math.

Rugby is taking extra steps so that they can keep playing.

All of the NA MT's should be 3.9. But, the FSM is not always right. Just check your ratios before buying. They're stamped on the ring gear. You'll want to pull the cover anyway to look for damage. Might also be that they are including the type of axle in the part number. The 2+2 83's came with CV shafts. So, if they removed the CV's the diff will be "empty" of axles.

The more tests that you do, the more people you catch that aren't showing symptoms. In America and other countries the lack of testing makes the death rate look higher, because only people closer to dying are tested when they show up at the hospital. Because they're not catching as many people with the virus. The irony of trying to make the numbers loo good by testing as few people as possible is that it makes the death rate look higher. I got a 2% death rate using this data. https://www.covidus.com/coronavirus-usa/

2+2's came with the smaller R180, I believe. Don't get an R180. If you can find an 87-89 (?) 300ZX Turbo it might have the CLSD R200 that is a direct bolt-in swap.

A 3.9 will match the first gear ratio on an 81-83 5 speed. The 80 5 speed might have the .773 overdrive which makes 5th feel like it belongs right after 4th, instead of being way out there. Just complicating your decision... 3.9 x 3.062 = 11.94 3.54 x 3.321 = 11.75

Like the US - https://www.cdc.gov/coronavirus/2019-ncov/cases-in-us.html

Here's another. Weird how different the numbers. WHO seems to be reporting less. Edit - apparently some sites only report on the weekdays. ??? https://experience.arcgis.com/experience/685d0ace521648f8a5beeeee1b9125cd

We've been loading up AV's Hitachi thread. Thought I'd start a new thread on the Corona virus. Here's a good way to watch what's happening. The yellow dots on the lower right are the scary part. They won't just stop climbing. https://www.arcgis.com/apps/opsdashboard/index.html#/bda7594740fd40299423467b48e9ecf6

If you "Submit a File" here it will be available. Pick a proper place for it, submit it, and it will upload.. https://www.classiczcars.com/files/

On a lighter note - https://katu.com/news/local/newport-pd-asks-public-to-avoid-calling-911-because-they-ran-out-of-toilet-paper

Very easy to believe though. It fits. "The German health ministry spokesperson declined the opportunity to correct any inaccuracies in Die Welt’s account."

https://www.theguardian.com/us-news/2020/mar/15/trump-offers-large-sums-for-exclusive-access-to-coronavirus-vaccine

This topic has come up before. If the nut falls off of the bolt the bolt can slide out and the wheel can swing away from the control arm. If the nuts fall off of the spindle pin the assembly stays together, it's just looser than it was. The lock pin locks all of the parts together. Lots of things on the car aren't needed for operation. You could safety wire the nut on the bolt, or the nuts on the spindle pin, and be about as safe, I guess.

I wonder how many tuners are going with a flat curve because they're mimicking the limitations of the mechanical distributors. Example from the internet - https://stinger-performance.proboards.com/thread/1003/megasquirt-tuning-basics-timing

I wonder who the "seller" is, to set a reserve so high for big bumper 260Z? Seems fishy. What is Copart?

The cars came from the factory with shady wire splices. Rewiring probably won't fix your problems. The turn signals are the switch, the gauges are probably the bulbs. You need a Z shop, not a god shop. (Edit - no offense intended to god shops...)

https://www.businessinsider.com/coronavirus-bidet-sales-increase-panic-toilet-paper-shortages-brondell-tushy-2020-3