Jump to content

Tyrone

Members
  • Content Count

    70
  • Joined

  • Last visited

Community Reputation

0 Neutral

1 Follower

About Tyrone

  • Rank
    Registered User

Contact

  • Map Location
    Tokyo
  1. well- I've done what i could in finding out why the car won't idle without the choke. I've pulled each of the Mikuni 44phh carbs out from the L28 and cleaned all the jets, but it still won't idle for some reason. I have fuel pressure, but i suspect it may be a fuel related issue as the car had been sitting for around a year. I did treat the fuel and added some new fuel along with some octane boost. When the choke was engaged, i adjusted them so the car would idle just barely without shutting off. When I opened the throttle it sounded like it was chocking. So i figure it's time to take it in to a shop who know's what they are doing . I was hoping someone on here could point me in the right direction...a shop somewhere around LA county preferably.
  2. well- I've done what i could in finding out why the car won't idle without the choke. I've pulled each of the Mikuni carbs out from the L28 and cleaned all the jets, but it still won't idle for some reason. I have fuel pressure, but i suspect it may be a fuel related issue as the car had been sitting for around a year. I did treat the fuel and added some new fuel along with some octane boost. So i figure it's time to take it in to a shop who know's what they are doing . I was hoping someone on here could point me in the right direction...a shop somewhere around LA county preferably.
  3. Lookin real nice- curious to know what size rotors you are using with the front calipers? Will you be running calipers in the rear as well?
  4. Tyrone

    IMG_1934

    Got to cleaning the engine bay a little bit for the show next month.
  5. Tyrone

    IMG_1933

    Got to cleaning the engine bay a little bit for the show next month.
  6. Tyrone

    IMG_1932

    Got to cleaning the engine bay a little bit for the show next month.
  7. Tyrone

    IMG_1932

    Got to cleaning the engine bay a little bit for the show next month.
  8. The one rubber seal that is between the back passenger window and the front window. I'm also looking for tie rod ends.
  9. Looks great- have you had any luck sourcing door rubber seals at all?
  10. Hey ctcurnes...i live in Long Beach and own the same car as you...but a clone- was wondering if you knew how i could get around California smog...my kenmeri is a 77. Any advise would help.

  11. Hey Cris!!! Man welcome and i must say that is a dope car! I moved down here from japan and I live in Long Beach now...I need help registering my Kenmeri and was wondering if you could tell me how you did it!? It's a 77....that's what the Japanese title says....and i know it aint gonna pass California smog!
  12. Hello, I was wondering if anyone knew were I cold get a rear mount for the R200 so that I can put it on my GC111? The R200 came off of a 280Z, but it's slightly longer than the R180 on the GC111.
  13. ooohhh, I see. But I don't think I need CV's for the 280Z R200? what is the length of your half shafts? Could you also explain what the A frame and lower mounting plate for the shocker is?
  14. Welcom fellow Skyline owner. pics please!! C210 I'm guessing....
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.