lan240

I thought someone could use these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2400932414&category=33638 Thanks Greg

Here is a ser of Watanabe rims I saw on e-bay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2400858255&category=33748

The retractors fit fine in the pockets behind the seat. The only problem I have is the mounting point on the rear strut tower. If any one has a picture of a 280 that has the seat belt mounted to the strut tower that would be great. I also need a picture of a 280 strut tower with out the covering.

This was listed in Hot Rod under the new stuff. It is called Chassis Saver by Magnet Paints. It sounds a lot like POR 15. Here is the link. http://www.magnetpaints.com/underbody.asp

I need some help. I have a set of seat belts form a 78 280Z that I would like to put in my 72 240Z. How do I attach the seat belt retractor to the rear strut tower? If any one has a picture of the 280 and 240 strut towers with out the covers on them that would be great.

Found this on E-bay and thought I would post it. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33731&item=2400385190

73 had bad carbs. You will wnat to replace them with a set of 72 or older round top SU's

I just thought someone mignt want a set of Panasport rims. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33748&item=1876833969

I am looking for a pair of clear turn signal lenses for my 72 240Z. I know that there are a few out there for $150.00 for a set but did not want to spend that much. If you know of a source where I can get a pair at a good price let me know. Thanks Greg 72 240Z

Here is a link to Strictly Z they have them for $50.00 http://strictlyz.com/

I am in the market for a new set of plug wires and wanted to see what everyone is running. I have a old set of NGK wires on the car now. I am thinking about getting NGK or Taylor wires. Thanks Greg 72 240Z

The early 240's had a different trans and the shifter hole was further back. You will have to trim the hole in order to use the 5 speed

How do you get the 432r and Skyline 2000GT. I had no problem loading the game

There are a few on ebay here are some links http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1873920627 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1873978112http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1873998110

Grant makes a wood wheel that will fit. Motorsport auto has a few listed in their catalog. Momo will have the largest selection of steering wheel. Mine does not have a very deep dish. The adapter is around 3 inches. I am still looking for the clear turn signal's

I have a Momo to Nardi addapter that will solve your problem. Let me know whay you end up doing. The Momo hub is around $45.00 from OBBN Motorworks

I just purchased a Momo hub for my 72 240z. I paid $45.00 and $7.00 for shiping from OBBN Motorworks. I recived the hub 5 days after i ordered it. Great to work with. Here is a link to his web page http://www.obbnmotorworks.com/Momo_Products__We_will_match_a/Momo_Steering_Wheels_Apache_Ch/momo_steering_wheels_apache_ch.html

I am looking for a Datsun or Z horn button for my Momo steering wheel. Dose anyone have or know where I can get one

I am looking for a Momo steering wheel hub. Where is the best place to get one. A used one at a good price would be good.

I am located in Jackson and would like to see if there any other Z owners in Mississippi. I am thinking about starting a Z club in Mississippi. Let me know if there would be any interest. I own a 72 240Z and would like to find some Z owners around Jackson. Thanks Greg

I am having trouble starting my 72 240 in the morning. I was working on the SU’s and noticed that the choke linkage was loose. When the choke is pulled back the jet’s are not dropping. How do I tighten this up so the choke operates correctly. Also the jet’s are turning instead of droping.

I have a u joing going bad on my drive shaft. What brand of u joint should I use to replace it? The car is a 72 240

I am looking for side view mirrors for my 240z. What is everyone using?

Here you go. Check out the link http://www.nissanparts.cc/cart/?pn=43213-E4100+

I was looking for some parts for my 240z and came accross this web page. If you have a part number you can check pricing and see if they have your part. Pricing is very good. Check them out. http://www.nissanparts.cc/