There is also this option, in stainless ....

Available from ZcarDepot & MSA I believe.    For late 280z, a slight bend is needed to line up with the different wheel cylinder angle of the port for the fitting.

Somewhere on here is a thread I did a while back,  replaced both the bridge lines due to one flex hose damaged & could not release it for the bridge line.

Thank you guys. I ended up fixing this issue by replacing the wheel cylinder.

next up is changing out the differential fluid. I bought Mobil 1 75w-90. I didn’t find much info about this on the internet for our diffs, but should this work fine or should I return it and go with Redline?

9 hours ago, BayAreaZ650 said:

Thank you guys. I ended up fixing this issue by replacing the wheel cylinder.

next up is changing out the differential fluid. I bought Mobil 1 75w-90. I didn’t find much info about this on the internet for our diffs, but should this work fine or should I return it and go with Redline?

Cant say about the oil, but I've read accessing the fill bolt on our differentials is a real pain.  Make sure you can remove/access the fill bolt before draining the old oil

I found this helpful, thanks @240260280z.  I used Redline myself, had to order it from amazon.com.  No local shops had it.

http://atlanticz.ca/zclub/techtips/differentialoilchange/index.html

Edited April 12, 20197 yr by siteunseen