Richard Oben Posted December 3, 2009 Share #1 Posted December 3, 2009 In the never ending restoration of 9070 I am looking for the soft lines that run from front of the hard lines from the AUTO trans to the radiator. My car had them but somewhere along the line someone cut them and just put a hose clamp on. I know it would work but would like to get the original lines but have not been able to find them. There are pix in the introduction section. Thanks in advance for any help anyone can offer. Richard. Link to comment Share on other sites More sharing options...
Richard Oben Posted December 7, 2009 Author Share #2 Posted December 7, 2009 Here are a couple of pix. If anyone has anything let me know. Thanks Richard. Lines by themselves and roughly in position on the car. This is an Automatic transmission Car. Link to comment Share on other sites More sharing options...
Arne Posted December 7, 2009 Share #3 Posted December 7, 2009 Richard, it wouldn't be totally original, but most hydraulic shops should be able to build replicas for you. No hose clamps needed. Link to comment Share on other sites More sharing options...
Richard Oben Posted December 7, 2009 Author Share #4 Posted December 7, 2009 Arne you seem to find all my posts, thanks very much for that, the help is much appreciated. I went to a hydraulic shop today the problem is no one has the 14 mm fittings, that I need on both ends. They tried to tell me it was something else, but since I have male and female it is pretty obvious what they had was not the same. I am off to another one or two shops this afternoon. For anyone else, if you have something that looks right or is even close let me know. Cheers Richard. Link to comment Share on other sites More sharing options...
240dkw Posted December 7, 2009 Share #5 Posted December 7, 2009 Richard: You can have these, they look OK but they are off a parts car I never saw running. In keeping with the Pay it forward thread they are yours for the cost of shipping. Link to comment Share on other sites More sharing options...
Richard Oben Posted December 8, 2009 Author Share #6 Posted December 8, 2009 I will take them! WOO HOO! What ever part (s) you need let me know, I have a complete parts car that I am using as a build manual for 9070. It is pretty rusted but is a complete series one. I do not need the whole long lines but I need the ends for sure. If you prefer to send the long lines I will take them complete and I insist on paying for the shipping. Call me if you want to 816-436-1610 or email me richard AT northracecars.com MAN THIS PLACE ROCKS! I spent almost all day yesterday trying to get this part. No one had them not one place could match the fittings, not one. This is a true life saver to me and VERY much appreciated. Cheers Richard. Link to comment Share on other sites More sharing options...
Richard Oben Posted December 8, 2009 Author Share #7 Posted December 8, 2009 I replied to both Idaho kid and 240kdw, thanks to both of you. Idaho if you find them hold on to them for the next guy. KDW, I sent may address, let me know the shipping costs. Cheers Richard. Link to comment Share on other sites More sharing options...
Richard Oben Posted December 16, 2009 Author Share #8 Posted December 16, 2009 Just a thanks to DKW, his parts are excellent and exactly what I needed to put the fluid in the trans. Thanks again. Cheers Richard. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now