Hey Rob, We’re those stripes just on the left hand side?

51 minutes ago, Yarb said:

Hey Rob, We’re those stripes just on the left hand side?

They were on both sides.

You can see the other side here: https://www.brelegacy.com/mm5/merchant.mvc?Screen=PROD&Store_Code=B&Product_Code=photo240z_image008&Category_Code=brearchivephotos240zs

And here is the passenger side of the 3 car: https://www.brelegacy.com/mm5/merchant.mvc?Screen=PROD&Store_Code=B&Product_Code=bre2_240_3_ocraceway_002&Category_Code=brearchivephotos240zs

Edited May 28, 20241 yr by SteveJ

39 minutes ago, Yarb said:

Hey Rob, We’re those stripes just on the left hand side?

 

Now I am wondering if there is a template out there. I just want to ghost darker stripes below the clear coat.

@Yarb, I think Peter Brock will tell you width and angle if you license it as a replica. 

4 hours ago, conedodger said:

@Yarb, I think Peter Brock will tell you width and angle if you license it as a replica. 

The Strips gained a more rearward angle over the following years. 70/71 the strips were entirely on the front fender. On the 73 Baja Z the strips were swept rearward putting them partly on the door. 

 

When Mr. Brock built a 240Z for himself in the 2000’s - the strips were swept even farther rearward.