mdbrandy's Content - Page 18 - Classic Z Car Club Skip to content

mdbrandy

Community Member
  • Joined

  • Last visited

Everything posted by mdbrandy

  1. Yes, it's the thin metal strip that comes around from the bottom, and something like halfway up the right side, that looks like it has a little metal button on the end of it. I had to bend this (carefully) toward the driver, as much as an inch to get it to contact the copper ring on the wheel adapter. Do you have the big polished aluminum billet adapter? I gather there are different kinds. That is what I have. Good luck! Mark
  2. He's been offering these for over a year now - I see them offered every few weeks. I'm assuming that he's manufacturing them, and that it isn't actually the same set over and over. It looks to me like the small kerfs (cuts) in the metal are his way of making the bends in the metal. Not particularly professional. I'd go with Charlie Osborne's (and in fact, I did!).
  3. Just so you know, there is a guy on e-bay that is constantly selling NOS alternator brackets, and they're blue. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905223332&ssPageName=STRK:MEWA:IT This must be the 10th one I've seen him sell.
  4. Yeah, about 9 months ago I paid rzola on e-bay $50 for his. It was used, although you can't really tell. Looks NOS. As several others have said, I thought about making them too, but just don't have the time. Go for it Mike! $20 plus or minus would be a steal for anyone that doesn't need absolute Nissan NOS stuff.
  5. Good story Rick! I have a good friend with two sons that could probably best that story - her sons must have totaled or damaged 4 or 5 different cars of hers over the past 7 years or so. I always thought she was crazy to let them keep driving her good cars after the first couple of times...
  6. I was seriously considering that even before the accident. Now I guess I'll have to do it...
  7. Given that I manage to complete the '69 BEFORE he's 40 , you're right! I suspect no kid will ever be driving it! (I have 3 kids, and the current car-killer is the oldest; two more to go!).
  8. Interesting thought on the driving school, but as far as I know there are none anywhere near IL. That just makes it logistically difficult (not to mention more $$). Anyone know of a school within a few hundred miles of central IL?
  9. Well, my 16 year old, driving 5 months, has now wrecked one of my cars. Luckily it wasn't my Z, and of course I can only write this because he and his brother are fine. So !@#$!@#%! Wet road. Not paying enough attention. Rear ended another car in the Camry. Camry lost. Hood buckled, radiator pushed into engine, who knows what else. Sigh.
  10. Believe me, I've thought about selling my kids video game systems on occasion. Taking gaming away from them for a week or a month is actually pretty effective, since they all just LOVE those video games. And we all did stupid stuff as kids. The description in that add is stupid squared, though.
  11. mdbrandy replied to MrMarcDude's topic in Open Discussions
    I've got scars all over my hands from 25+ years of car work. Wrench slipped last December when I was tearing down a 280 parts car and I took a huge chunk out of my right thumb, right at the base over the bone. Took about a month to heal right, and it's still sensitive. I've taken to wearing those "Mechanix" gloves now to "cut down" on the injury potential.
  12. If it's all true, then the kid got off light if all that happens is they sold his stupid video game system. Drinking, lying, destruction of property, .... at 13!:stupid:
  13. mdbrandy replied to halz's topic in Interior
    They show up on e-bay quite often.
  14. mdbrandy replied to halz's topic in Interior
    Later ones must be color matched. My '78 280Z has a brown interior, and brown straps.
  15. Not defensive - we just like the first gen cars better. Remember that the site is: "Welcome to the biggest club dedicated to the CLASSIC Datsun Zcars (240z, 260z, & 280z). " Now, having said that, no one should insult a ZX owner here (There should be no insulting anyone anywhere on this site as far as I'm concerned). I, in fact, was seriously considering a ZX for my daily driver before I found my '78 280Z. So while I would have enjoyed a ZX, I PREFER the first gen cars.
  16. No problem. I think it's cool that I own both one of the first and one of the last of the first gen Z's. So I'm fairly up on my body style dates .
  17. Nope. 1979 was the first 280ZX. 1978 was the last year of the original body style in the 280Z.
  18. mdbrandy replied to Zrush's topic in Funnybone
    It should work with phone numbers that are of the form abc-wxyz. If you call the value "x" the "abc" from the phone number, and the value "y" the wxyz from the phone number, the problem comes out like this: ((80x + 1)250 + 2y - 250)/2 = (20000x + 250 + 2y - 250)/2 = 10000x + 125 + y - 125 = 10000x + y Thus, if your phone number is 555-1212, then the number you get will be 5550000 + 1212 = 5551212, your original phone number.
  19. mdbrandy replied to CrashNBurn's topic in Help Me !!
    Major bummer. I did the exact same thing in about 1989, but luckily I was driving a POS Dodge Station Wagon. Did a similar amount of damage to my hood and grill though. No guages to look at - I had glanced down at my radio. Good luck bringing it back. That kind of damage is not something I know much about... "We feel your pain"
  20. Right. At least two of the cars on the board (26th-Z and mine) have established that ours came without evap tanks because they were made in 1969, and the laws didn't mandate the evap tanks until 1970. Got a new hose from Chloe, but we did it by picture and not by part number. Pic of the one originally on my car attached.
  21. Mike's got to be right...who in their right minds would take a Fuel Injected 280Z, and put FLAT TOPS on it? ROFL :stupid:
  22. No. Given the flat-top carbs and the fairly slim bumpers, but with the big rubber blocks, it is probably a 1974 260Z 2+2. Definately not a '72, and not a 280Z either.
  23. OK. A little more research, from http://www.synlube.com/glossary.htm#octane%20number : expression of the antiknock properties of a gasoline, relative to that of a standard reference fuel. There are two distinct types of octane number measured in the laboratory: Research Octane Number (RON) and Motor Octane Number (MON), determined in accordance with ASTM D 2699 and D 2700, respectively. Both the RON and MON tests are conducted in the same laboratory engine, but RON is determined under less severe conditions, and is therefore numerically greater than MON for the same fuel. The average of the two numbers — (RON + MON)/2 — is commonly used as the indicator of a gasoline’s road antiknock performance. The gasoline being tested is run in a special single-cylinder engine, whose compression ratio can be varied (the higher the compression ratio, the higher the octane requirement). The knock intensity of the test fuel, as measured by a knockmeter, is compared with the knock intensities of blends of isooctane (assigned a knock rating of 100) and heptane (with a knock rating of zero), measured under the same conditions as the test fuel. The percentage, by volume, of the isooctane in the blend that matches the characteristics of the test fuel is designated as the octane number of the fuel. For example, if the matching blend contained 90% isooctane, the octane number of the test fuel would be 90. In addition to the laboratory tests for RON and MON, there is a third method, Road Octane Number, which is conducted in a specially equipped test car by individuals trained to hear trace levels of engine knock. I don't have a conversion, but it appears to me that what used to be, say 91 Octane on the RON scale is now more like 87 on the (RON + MON)/2 scale. Thus, octane ratings may not have REALLY dropped over the years, but knowledge of what is important, and the ways that it is measured have changed. Of course, since I don't have a conversion, it may be that 91 RON might be 89 (RON+MON)/2, so there may have been some degradation in Octane. I haven't seen any real conversion. What I have seen is that Octane rating is very complicated.
  24. I believe that the way Octane rating is calculated changed some years ago. Something about RON (Research Octane Number) versus MON (Motor Octance Number). I think the current value is (RON + MON)/2 . There's a bunch of info at : http://www.repairfaq.org/filipg/AUTO/F_Gasoline6.html RON appears to give higher numbers, and was used some years ago. MON gives lower numbers, so octane numbers are lower now. I'm still doing some searching, and am not quite sure about this yet....
  25. I run regular, 87 octane in my '78 280Z, and it seems quite happy.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.