OngsterZ's Content - Page 2 - Classic Z Car Club Skip to content

OngsterZ

Community Member

Everything posted by OngsterZ

  1. I'm hoping the Sunset Orange is again avail, as was on the 350Z. Daytona Blue is of course second choice ?
  2. Other features I'm hoping for - useful susp adjustments (camber/caster), LSD, hydraulic steering, traction control off switch, rev match bypass - leave these for driver options, less electronic intrusions.
  3. And hopefully seats are thin enough with useful height adjustments, ala for a helmeted driver.
  4. Brother's 70 has been sitting, need at least fuel system clean and flush, radiator, hoses, etc etc. Anybody has local suggestions? Mike's Z has not been responsive Thanks a bunch!!
  5. Need a reputable shop in this area. Mike Z is hard to reach nowadays. Others to recommend? Thanks!!
  6. Yep, fender bulges but nothing else, no fake scoops, no weird character lines, is what I'm hoping for. Make it 'look' light at the very least. My JDM flares give that aggressive wide stance, although yes helps widen the track a bit. And please please keep the 6 spd manual as an option, or no buy here. The current 350/370 clutch take-up, though, is too high and vague, same as was in my G35. That needs improvement.
  7. Back....yeah I want the Z Bash to happen again, get the excitement going, the new 2021 is around the corner!!
  8. Roof line, hood profile, headlight 'bucket', soooo similar to my S30, very nice! I sure hope weight is kept in check and pricing reasonable. Supra sized would be awesome but platform probable won't allow for that.
  9. I'm in, all set for the early am Sat cruise also, rumble in the canyon.
  10. Very true John. Frustrating when you can't get good exit speeds out of 9 and 16. Normally if I can reach 120 at the Start-Finish in either the E46 M3 or this Z, it's a good run. How about coming out on Oct 3rd, next event? I also instruct with Speed Ventures when needed. For the most part this first outing was a non-issue event, my EMI (Erik Messley) old-school coilovers held up fine and the corner weight at West End was spot-on, see my Hankook's tire wear below. The front right corner is always hotter because of the banking.
  11. Thanks! Current numbers (Hp, torque, AFR, boost) using the baseline Central SPL ecu. Reliable so far.... Dyno Dynamax roller SAE adjusted
  12. This was my baseline event. Auto Club Speedway is a horsepower course but handling also helps on the infield. I'm powered by an RB26DETT putting out 256whp (8.5 lbs boost) for now, keeping it in the Nissan family Also helps that I have coilovers (EMI Racing) and Wilwood brakes. Very happy that I met my target of low 2 mins in this car, next goal is 1:55 with more tuning. Full results are here (8-8-2015 event). The two top Scions are supercharged, hp numbers are whatever you put down. http://speedventures.com/results/Default.aspx
  13. Nice times at ACS, so far lapping at 2:00 min flat, better than I expected. Pics and other Datsun contingents. Next event Oct 3, 4.
  14. Speed Ventures event Fontana CA http://speedventures.com/events/eventdetail.aspx?id=530 My 73, a '71 and '78 are IN for the full 2.7 mi Roval!! Anyone else local want to stop by or also run the Roval or autox? Hope to see more out there.
  15. Thanks John, if you can also work on my RB26DETT-swapped S30 when the time comes for repairs, I'll look you up.
  16. Anyone know of one, or I'll just ask Motorsport Auto? This is for my brother (70 Series 1 240Z), looking for a somewhat local shop. Thanks guys/gals!!! I'm familiar with Mike's Z but that is too far for him.
  17. I sure want to get back into a Plymouth Cuda, 1970 or 71, that was my first car in high school, a bit of a beater but I fixed it up in auto shop and cruised Whittier Blvd with buddies, fun times! Probable chance of owning one is zero knowing what they're worth now. Second choices are the orig '90 or '91 NSX and the '03 or '04 SVT Cobra Terminators, always gets my heart pumped!!
  18. OngsterZ posted a topic in Open Chit Chat
    I'm hoping something materializes about this..... http://www.digitaltrends.com/cars/next-generation-nissan-z-specs-news-rumors/
  19. For those of us with conflicting schedules, it would be nice if it's possible to join for one or parts of the whole trip. I most likely can do the first day to Buttonwillow but that is the only leg that is open per my schedule. Possible, and cost? NASA membership still required?
  20. If you're asking me, the bumper (front) is fiberglass, tower brace is the Cusco OS (only one that fits over the RB26) and I bought it from RHDJapan, shipped to the US.
  21. Car: 1973 S30 240Z VIN: HLS30-157796 Build date: 4/73 Orig paint code: N/A Current exterior color: Nissan 350Z Daytona Blue Interior color: Black Only history I know car was prepped for track duty, which I'm continuing to build (RB26DETT). I would love to find the history of this car. I know Carfax may have it but I doubt it. Figured this would be the best place to try.
  22. OngsterZ commented on Scarab#157's blog entry in Blog Scarab#157
    Where are the updates?
  23. So, is the best update placed here or at the zhome site? I have one to add.
  24. Good to know, I suppose helical gears give out less frictional heat than clutches. Installing EGT at those cyl locations sounds optimal, should be my next upgrades, only have a boost gauge for now. Our track days here are 4 or 5 x 25 min sessions, and it does get hot, 95+F in summer months. Any best recomm for Z32 tranny fluid, Nissan OEM synth, Redline, ? and what viscosity?
  25. This shouldn't decrease value, need to beef up the R200 for tracking, will watch temps and change fluids often.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.