Everything posted by TomoHawk
-
Gas dripping at rear after fill-up
If you're going to spend the money on a fuel cell, why not spend it on making a new gas tank that fits to the car? Maybe there's a fabricator in your area. Like Gary said, you cou'd still have the room for a spare tire, and it would look much nicer for a street car,
-
Power antenna electrics
In a way, it is a custom switch, since it's not an oem switch; just one I got from the electronics store. I have an automatic mirror too, and I was looking athe controls on it to see how to use the Datsun switch to control it in the same way as the Datsun antenna.
-
Power antenna electrics
there isn't anything to take pictures of; it's the oem antenna.
-
Power antenna electrics
I'm done with this one. I got a SPDT rocker switch (center-off, momentary) from my local electronic surplus store, and it fit exactly the square cover that's in the middle on my console (under the radio.) I just cut out the material, a little filing with a square file, and the switch presses in. Then I clipped the pigtail from one of the dead antennas I got from eBay, a little soldering, and it plugs in the hole, the console, and the wiring harness. After chgarging the battery, I tested the antenna, and it works great- goes all the way up & down. Now I just need a little black vinyl paint for the switch, a couple screws for the antenna bracket, and to put the panels back in the car. thx
-
Interior almost complete...man I'm tired
That's really nice. The first thing I looked at the was the sides (rocker area) and the area under the pedals. My footpad came loose, and the carpet wore some already. How does your footpad attach? thx
-
Gas dripping at rear after fill-up
The discussion evolved, Stephen. Maybe Victory didn't advocate a certain technique for purging, but he did share his experience that hopefully, was successful for him.
-
Gas dripping at rear after fill-up
The reason things smell like gasoline after many years is because of some of the components of gasoline that are especially "smelly." They act like a kind of oil, or a sludge. In the lab, they drive the analytical instruments crazy, so you have to dilute the samples to get it to go through. The same components will pretty much soak into the metal and it's really hard to get rid of them, and even in minute amounts, you can still smell them. Albeit, you should be very careful of gasoline vapors; they are what makes you car's engine "fire up" after all. This stuff I've learned after working for years in an EPA lab, analyzing dirt contaminated (or not) with gasoline from storage tanks. thx
-
Gas dripping at rear after fill-up
You could probably do yourself a big favour, and get your tank cleaned & seled. then you'll find the leak, and have a perfetly rust-free gas tank with all new (and safe!) fuel hoses. The downside of this is that it may be expensive. Eventually, it will need to be done.
-
Camping out in your Z
NO tie-dye paint job with peace signs and beads strung around the roof? OH- surf board.
-
Combo switch blues...
I learned to drive in cars that had separate lights & wipers itches, so it's probably nothing new. It just wouldn't look as pretty as stock. Would any other combo switch work maybe?
-
Camping out in your Z
Don't forget about all the other stuff you'll have to carry with you (helmet, cleaning supplies, food) so anything else you carry should be as eliminated or as small as possible. Sleeping in the car could be comfortable, if you figure out how, so you'll eliminate the need for a tent. It'll also be a little safer from the local wildlife. I've spent over 600 days & nights in theback woods while in Scouting, so I have a very good idea on how to camp with little or no stuff. Using a groundcloth is the best idea besides a tent with a fly top. Otherwise, you get wet if it rains. Also, firewood is getting very scarce, and in most places I've been, it's use is prohibited or at least very controlled. So you're better off using a fueled-stove for heating water. A fire might be pretty or you can warm your hands, but it's the most in-efficient thing for heating anything- unless you've got some of that new self-heating food. thx
-
No High Beams
In general, on the 280Zs, the red wires ( with a stripe) are for the lights (heavy wires with a white & yellow stripe for the headlamps), and the white (usually heavy gauge with a stripe) are battery voltage wires. Stephen is correct about no headlamp relays on the 280Z. They started using those on the ZXs. The only relays on a 280Z are for the ignition interlocks, E.F.I system & fuel pump, the a/c, and the horn. I was thinking first off, after Venom mentioned the engine being out, is a broken wire, but a loose connection is totally possible. With the headlamp connector unplugged at the front corner of the engine bay, you should get +12V to the red/white wire (with the switch on), the other two are ground legs for the lamp filaments, and you could test the lamps directly if your patch the red/white, and ground one of the other pins. It is also feasible for the headlamp switch to be bad, as the power for the headlamps passes through the switch twice (both battery and ground legs.) The headlamp connectors ( see p. BE-9 in the FSM) involved in the junction block are both white, ocated behind the glove box, but also accessible from underneath.
-
Camping out in your Z
Is there any feasibility to camping out or sleeping in your Z? I mean as an alternative to renting a cabin- unless you know a friendly lady Z-owner:) I once spent a night fireworks-watching an a hatchback in high school. I think you'd need a way to recline the front seat(s) forward, and put in some kind of board so you could relax without getting a sore back (BTDT in a folding hospital bed- my back was ACHING from sleeping bent! :mad:) Another option would be one of those car-tent things (do they still make those?) that goes on the hatch, or just a plain old tent; the modern lightweight type, which fold up nice & small. And a sleeping bag or blanket maybe. The only thing left after that is your food & cooking, which could be done with a small pump-stove, which only requires a little unleaded gasoline (siphoned from your Z's gas tank!), unless you plan on drinking only beer (Guiness- it's better at room temp or slightly less) and bathing. Ever wash yourself head-to-toe with GoJo? (it's waterless...) But as long as you keep the windows down, and the speed up, who'll notice?:beard: Peace.
-
I just want to drive...
Take a look at the Frappr map (http://www.frappr.com/zowners). Type your location in the little box at the top of the map box to see who might be in your area. Maybe look at roadgodz.com, they do serious roadage/mileage.
-
Combo switch blues...
The wiper controls go through the headlamp combo switch too, what do you think about that?
-
Rebuilt my combination switch today
Just a note for people digging into the 280Z headlight/Wiper combination switch- take care to clean the switch points up on that as the power for the headlamps goes through the headlamp switch TWICE; one for the battery side, and one for the ground side. Usually only the ground leg is switched, so I figure they did it like that for extra safety. thx
-
Accelerator Rod Boot help
I've made it a point to replace all the rubber pieces that I can get. the only rubber piece that vcan't get is the one in the inner fender, behind the headlamps, that the headlamp wires go through. I wil probably get a big grommet and a piece of tubing (bicycle inner tube?) and maybe some zip-ties. thx
-
Cold Air Intake
Thesupport plate was made of 1/8 aluminum, and the hangar strap was made of a chromed steel strip. I cut the plate using my jeweler's saw (used for model-making.) You could use anything for the strap, andthe strap wraps completely around for support. I would suggest something that won't rust. Also, I used the oem clamps for the hose end atthe AFM, and a worm-screw clamp (modern) for the filter end. Stephen- Is that one screw really going to hold the weight of the tube & filter? That's why I use both airbox screws. I am still wondering about what difference there is between the short and long tubes? #1: Strap #2: modern clamp on filter end and oem clamp on AFM end
-
Cold Air Intake
Here's a picture of my intake & support bracket I got the elbow & filter off eBay, I used the oem rubber bellows to connect the elbow to the air meter. The strap gose all the way around so the tube doesn't get distorted. HTH
-
Cold Air Intake
About the only thing you could get off eBay isthe elbow- if you can find the right one. I wasable to use the oem rubbers off the car; they were new tho.
-
Which new battery most resembles original?
Didn't the 1970 model batteries have the battery caps on it?
-
A sign of things to come for vintage Datsuns?
Victor- By the time you will no longer be able to use your Z or Datsun, we'll have FLYING CARS. literally.
-
Wind tunnel testing on the S30
Do you mind to remind us what cD, cLF, and cMY are? I forget...
-
Lifesize Crying child dolls
I doubt it, zbane. There are no carpool lanes in Ohio. Besides, you never see the faces on those kiddie things.
-
Ebay madness "One of 50 in this special run series"
those are vintage K-Mart from 1971..:laugh: