ChrisZ

Mike, forget about Nissan in Denmark, remember not many of these cars left here, all rusted i cant even get a aftermarked gasket kit here and Nissan can't hardly fint there micro finch and if so they probably have to get it from out of the country. Chris

Welcome, nice looking car there mate, funny thing we had the 280Z here in Denmark, with fuel injection, big bumpers and all that stuff. This is a great site with some nice members, if you want to go more local, there is also http://www.zclub.net Chris

Please don't tell me to put this in parts wanted, i wan't it to be seen. I have rebuild my engine, when i bought my car the PO had torn the motor apart due to a burnt piston, i have started on the assembling this weekend and i almost got the engine ready to install, when i found out that i'm missing a oil drain plug and all the flywheel bolts !!!.....:mad: Many fasterners was missing and due to time i decided not to go with the bolt kit from Datsun Spirit and went for stainless A4 and now this. I'm really in time problems here, big bummer, i need to have the car on the road in 4 weeks and first i need to get some paint repairs done, then get it ready for inspection, pay registration tax and have it tagged, so not much time left and shipping can take some time. Do any of you by chance have those parts as spare and are willing to sell and ship it to me ? if so let me know the price of parts and shipping and please have it shipped by airmail in a envelope, you know the one with bubble wrap. Chris

I have a thought here, when you say it feels like it is dropping one carb, is it then dropping one or does it just feel like it do ?. have your engine been getting new pistons/rings recently ?. It might sound stupid to ask this. Chris

The LD28 was also used in the Patrol, try to look for some of those. Chris

I think you should get hold of a radiator shop, look up your local and get a quote. Chris

I'm assembilng my engine and have a problem finding out where the little plug have to go, can any one guide me to where it should be. Thanks in advance Chris

Caen, won't the seller ship and what diff is it. Chris

I assume it is Olympia WA you are refering to, lot's of members in WA. Won't the seller ship, maybe your freind should have asked before bidding, anyway i hope someone will help and it all will work out in the end. Chris

You got a point there Stephen. maybe he should pull his trailer off of the tow hook:D Chris

Post #1 states "carbs swapped" I still think we need some more information. Chris

Don't swap cam, at least not yet, find out what you have in that build, all you components have, list it here and you might get some more help. Chris

Pascal, if you need some tail lights with amber flash, there is some here: http://cgi.ebay.com/Datsun-240Z-Tail-Lights-Euro-69-73-Good-Condtion-Looms_W0QQitemZ300298540710QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item300298540710&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A10|39%3A1|240%3A1318 Chris

Doug, member alhbln is living in Berlin, but i guess that it's to late now. Chris

Welcome from Denmark, if you like to know if the PO is a member you should post your vin number, at least. Where in Germany are you from, i have contact to two other Zed owner in Germany, i could put you in contact with them. Chris

Just get a PayPal account, that don't cost anything, not what i know of, except of a higher exchange rate. Chris

Zedy, at the top bar, choose members and scroll down to donate. IT WORKS I'M RED Chris

A stock re grind !!.... i have several stock cams and none of them needs re grind, have a cam ground to stock specs sounds silly to me, it must have been worn out alot to do that. Anyway if the old motor had the same symptoms it must be somewhere else. Sean is there any parts from the old motor that is still in use ? Chris

Please do, but i guess that i have to stay inline as 2nd. Chris

Hey, if you get a price on those center caps, then let me know the price i'm lookinf for a pair my self. Those wire wheels would look better on my roadster:classic: Chris

Oh yeahr, stay the he.. away from that guy. Now next time you get to the car, make a list of the part #, what is stamped in to the cam, distributor and so. Chris

Les i forgot to answer you on this, sorry man, i appreciate you will break up a set, it will however take some time before i get to the interior, when the time comes, wouldn't it then be possible for you to get the cushion from who ever makes them ? Chris

Yeahr, guys your probably right, it was just a thought i had. Chris

He runs a Pertronix, but on what distributor, he should follow the FSM, like re building a motor, if all is spot on when done it should start right up. What about the fuel pump, is that the right one, if the arm is to short or have the wrong bend it could also make it starve. Chris

Don't think about the chrome buttons, that will be my problem.:bulb: Can you take a comparison picture and post it, i would very much like to see one. Chris BTW. i will of course cover shipping:rolleyes: