Galaxybj's Content - Page 6 - Classic Z Car Club Skip to content

Galaxybj

Community Member
  • Joined

  • Last visited

Everything posted by Galaxybj

  1. My simple tool for removing the clip is a straight section of a metal clothes hanger with a 90 degree bend in one end that is about an 1/8 to 1/4 inch long.
  2. One thing I do is ensure the top part of the retaining clip is toward the handle to make it easier to get off and that it is pushed all the down to where the curves in the lower part of the retaining clip are able to protrude through the slots and lock on the regulator.
  3. Bought my Z from Jaremko Motors in Spokane, Wa., July 1971. First photo was on her maiden voyage to California from Spokane. The photos of it within the roped off area are in 1984 when I sold her at Tri Cities Nissan, Pasco, WA. The last photo is when I got her back in 2008. She is within about a month of being back on the road. See my garage for some photos after her new paint.
  4. Picked up my freshly powder coated splash pan. (must be the item to do this spring :-) )
  5. I had mine painted last year. It came out a bit lighter than the original 901. I don't know if the color of the primer would make a difference, but the factory primer was a "rust reddish" color. Grey primer was used for the new paint. Oh, I'd have to check to see what brand of paint was used as I don't recall now, but I am fairly certain it was not the PPG. Wish I had researched for that prior to the paint job. Oh well.... Look forward to possibly seeing your car after the paint job. It looks realy good as is.
  6. I had an interesting experience with a seller on ebay this week. I found a retainer ring for a 280Z inner shift boot (doing a 5 spd conversion on one of my 240Z's) for about $32. Shipping was $14 something so I asked the question "will you be charging the $14 something for shipping or actual shipping charges?" The reply was "Thanks". The change to the listing was the price upped 14 something" with free shipping. Will I be buying it - no - so the search goes on.
  7. Replaced the clutch master cylinder and hose to the slave cylinder then took a fall ride on Corrales Rd where the fall colors of the trees along the bosque are very pretty.
  8. I spy a Z - at 9:17 of the video, just after introducing Sam Posey, is the number 33 Bob Sharp Z Sam Posey drove. This is a great video - the sights, the sounds - WOW!!
  9. Welcome from a fellow New Mexico resident. Look forward to seeing pictures of your new acquisition and possibly in person one day. Lots of good information to be found here on this site.
  10. Got one this past winter and I fully agree - it is really good looking. I would have done my Z a diservice had I gotten a used one and tried to spruce it up. BTW, yours old one is in much better shape than mine was.
  11. Question (Don't laugh - I just want input to do it right) - I am fixin' to install my 6 into 1 header and noticed the front and rear stud holes are larger than the rest. This can be seen in the photos of the original post. So, is just a large flat washer adequate to use when mounting such as what appears to be used in this installation? Thanks
  12. Carl, same question as above, but for the Interpart Muhlhollands. I got a set a couple years ago as part of the refresh on my silver Z.
  13. That is the part number for the moustache bar for models from 7/71 to 7/73
  14. Brought HLS30-30855 home from the paint shop. Now the fun of putting her back together.
  15. First registration here in New Mexico for 5/71 was 152.70 (this past Nov) for 1 year. That included all the taxes, VIN verification, etc. 2/71's renewal for two years was $73.00.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.