Stick Shifter Length - Page 2 - Suspension & Steering - Classic Z Car Club Skip to content

Stick Shifter Length

Featured Replies

  • Author

Additionally, what are the years for the A and the B tranny in the US market?

  • Author

Just looked at the one that is for sale and from what has been said here this is nothing more than a stock, unmodified stick. Here's a pic of it.

post-3356-14150793105067_thumb.jpg

The "B" type transmissions were used in the late 71 model year and after that....

The short shifter has a two piece mounting plate that bolts through the stock pivot on the trans case and moves it up away from the trans case by an inch.

Your pic shows a stock unmodified B type shifter....

Originally posted by 2ManyZs

The short shifter has a two piece mounting plate that bolts through the stock pivot on the trans case and moves it up away from the trans case by an inch.

Thanks, Keith. I kinda thought that there would need to be an adapter as you describe. :D

Carl

  • Author
Originally posted by 2ManyZs

The "B" type transmissions were used in the late 71 model year and after that....

Ok, so then my '77 5-speed would be considered a type B and will be ok when/if I get a short shifter.

Originally posted by 2ManyZs

Your pic shows a stock unmodified B type shifter....

That's what I figured from your previous description. Bummer! I will just keep my eyes open for one.

  • 2 months later...
S
Sponsored
Advertisement
Go Ad-Free
No ad showing? Ads help support ClassicZcars. If you use an ad blocker, please consider allowing ads on this site or Go Ad-Free.

Nope, sorry, the short shift kit only works on the B model transmissions....

There isn't much you could do to the A model due to the design of the shift lever linkage on the outside of the transmission.

hmmmm... i wanted to replace the shaft due to fact that when i tighten the nob all the way i'll i can still spin it.... right along with the shaft.

Sounds like the mounting nut on the bottom of the lever is either loose, or the tapered bushings the lever inserts into are shot...

You can still get the solid bushings for the A model shifter, which might help tighten up the shifting on yours. Try Chloe at MidwestZ, she probably can supply them.

excellent. i will go ahead and do that. i need to wait till it warms up a little outside so i can get the console off and take a look-see.

  • Author

A vs. B tranny. What years were these? I have seen this somewhere but can not find the info now.

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.