Sudden Running Lean Issue - Page 5 - Help Me !! - Classic Z Car Club Skip to content

Sudden Running Lean Issue

Featured Replies

On 3/10/2024 at 12:17 AM, chaseincats said:

The weatherstrip (the rubber rectangular gasket that goes inside the efi connector) for cyl1 was working its way out of its mount when the car warmed up and prohibited cyl1's efi connector from fully seating.

How did you get the retaining clips in?  The plug has to be firmly seated to get the clip in.

  • Author
1 hour ago, Zed Head said:

How did you get the retaining clips in?  The plug has to be firmly seated to get the clip in.

I don't have the clips

22 hours ago, chaseincats said:

I don't have the clips

If they're stock like injectors you should consider using the clips. They have held mine in place since I replaced those plugs in 2011. Bought from a popular Ebay guy that had Bosch rebuild kits.

Sounds like the old school factory bakelite plastic where you push the clip in from the side. If that is the case trouble is imminent due to vibration. That little seal is for moisture.

Many people switch to the later model spring clip connectors.  It's a fun project.

If you decide to do it you can get them cheap at any well-stocked salvage yard.  90's GM, Volvo and BMW plus many other brands used them.  They're called EV1 style injector connections.  Kind of spendy if you buy them new.

A piar of crimping pliers and some insulated butt connectors is quick and pretty easy.  They look like this -

 

S
Sponsored
Advertisement
Go Ad-Free
No ad showing? Ads help support ClassicZcars. If you use an ad blocker, please consider allowing ads on this site or Go Ad-Free.

They ate like $9 each on Amazon. Comes with the boot

  • Author

I remember popping the clips off to work on the car a while back and not putting them back on since they were so obnoxious to get out.  Message received though 

  • 2 weeks later...
  • Author

I just went and took a look online - the retaining clips are surprisingly expensive for a little piece of wire...

Edited by chaseincats

Deleted

Edited by Yarb

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.