Hoping one of you kind folks has a 280zx, any year (79-83), within reach that can measure a 280 ZX windshield for me.

I "Acquired" a new windshield that we thought was S30, but clearly (hahaha) it is not, as the gasket was too short. The shape is right, just not the dimensions. Mostly it's too tall. Thinking it's for ZX then.

The labeling in the corner I think is missing some info. The second last line seems to have some dots that may be the remnant of the actual part numbers.

See it below. I don't see the usual part numbers I'm expecting.

If any of you can measure the length along the top, bottom and sides, I can compare to what I have and see if its close.

Thanks

Yes, its functioning quite well as a green house...

 

 

 

Edited July 12, 20205 yr by zKars

I just put one in 2 weeks ago.. i recall to measure a 131 cm inside from widest (lower) corners, measured from the inside..  not sure..  at the moment i have none reserve so can't measure one for you.. (exact..  if no one else reacts send me a pm and i measure the screen in my car from the outside square left up to low right.)

some pics that i found may help..

If i compare the screens it could be a 280zx screen.

 

Edited July 13, 20205 yr by dutchzcarguy

Mine is still in the parts car, with the trim off. I can get some measurements this afternoon when I get home from work.

 

@zKars 

Jim, straight up the middle on a Z is about 21" and the ZX comes in about 24"

Should be an easy way to see what you have. I hope that helps.

 

Perfect. This one is 24 in the middle. That should settle it. Thanks!