Can I use a 280z flywheel on my 240z engine with a 240z transmission

 

 

Sent from my iPhone using Classic Zcar Club mobile

yes. the only difference is in the 2+2 size of flywheel

Coupes are 225mm friction surface, 2+2s are 240mm across. Get it resurfaced. My guy charges $40.

Easy to tell apart if your measuring eye isn't what it used to be.. 9 clutch plate bolt holes on the 240mm, 6 on the 225mm. No 6 bolt clutches don't fit on a 9 bolt flywheel. But any 280/2260/240 flywheel fits all the cranks. 

Now that special BW 5 speed in the turbo 82-83 ZX's is a different animal, clutch wise. Not sure if it's flywheel is the same either. 

Ok checked a  bW -T5 flywheel. Same as the 240mm flywheel, 9 bolts. Clutch disk has the same splines on the input shaft as the Nissan trans.  Rock auto shows clutch kit is Exedy 06030 for the 2+2 Nissan trans, and 06032 for the turbo BW T5 trans. Must be something different about the clutch then

Edited September 29, 20178 yr by zKars