Can anyone tell me if the seat sliders from a 280z are the same as the sliders from a 240-260z?

Thanks,

Chris

I don't believe so, but someone else will have to verify. I recall having to swap some at one point because of bolting issues

Different part numbers, FWIW.  Changeover was as of 7409.  Part number changed again in 7608.  Hard to say, though, whether the PN changes mean that the rails are/are not interchangeable.

Depends on the year of 280... 77/78 are different than previous years.

 

An easy way to tell the difference is that the 77/78 have an angled front mount and flat rear mount while all the previous years had flat mounts on all four corners. I believe the change occurred at the same time as the different doors. They changed a lot of sheet metal at that time and I believe it was all part of the same upgrade.

 

So I believe the bottom line is that you could use 280 mounts in your 240 or 260 as long as they are from 1975 or 76.

Thanks guys