New to the forum and didn't see any threads.

I've seen many pics of wipers sticking up and not laying down. I can get a new motor but wanted to see if there was a simple fix.

Define sticking up & not laying down & what is your goal?

Mark in Portland

Define sticking up & not laying down & what is your goal?

Mark in Portland

I think he's talking about the wipers parking in the up position.

Yes they park in the up position.

I pulled the motor out today but not sure what to look for and what might be bad.

I want them to park in the normal position

Edited February 17, 201412 yr by Razerworkz

My wipers will do that if you turn the switch off at the wrong time. It seems like I have to turn them off on the down stroke to avoid the problem. But then I have a 1971 240Z, with only two speeds. The 260Z is more sophisticated, giving it more failure modes.

After I replaced the wiper motor on my 73 my wipers did the same thing. Turns out I re-installed the linkage wrong. It has been about ten years and I don't recall specifically what I did to fix it, but you might look into the linkage.

I wonder if putting the slot on the end of the linkage that goes on the motor shaft 180 degrees out would cause the wipers to park pointing up?