jaroslav Posted November 23, 2004 Share #1 Posted November 23, 2004 iple Mikunis,manifold, air cleaners and many jets and chokes for sales..... VERY GOOD CONDITION! sell as a set only, will not part. Currently running a 3.1L $1200 US firm Also...... Nissan Competition Headers VERY GOOD CONDITION!$350 US 280zx Magnetic ditributor Very Good condition $250 Jacobs electronic Ignition $200 P90 Head, Racer Brown Cam, Crane Valve springs, not ported, Shaved, crinkled valve cover paint $350 or best offer Diesel Crank $400 Fresh rebuilt 5 speed 1500 miles $600 Wheels...set of 5 powder painter 15" Swastika wheels Very clean, with 4 AR1s less than 2000 miles on tires $550.. Set of 14" four spoke gold wheels. Ultralight from Japan. New condition. Less than 300 miles on them. Currently mounted with a set of Dunlap racing slicks Have 6..(2 brand new). $500 for wheels, $700 for wheels and slicks Will send pictures upon request. This is from a clean running street car. Not abused or wrecked....just making room for powertain modification Plus shipping Thanx! Link to comment Share on other sites More sharing options...
Marty Rogan Posted November 23, 2004 Share #2 Posted November 23, 2004 What year car is the 5 spd out of? What was done to it during the rebuild?TIA,Marty Link to comment Share on other sites More sharing options...
jaroslav Posted November 23, 2004 Author Share #3 Posted November 23, 2004 Not sure what the tranny came from. But the rebuild consisted of all the bearings and Sybchros...I beleive it was a 280ZX?? The tach runs just over 3000rpm at about 75mph with nearly stock sized wheel/Tire combination...if that helps at all.... Link to comment Share on other sites More sharing options...
Marty Rogan Posted November 23, 2004 Share #4 Posted November 23, 2004 It helps a bit. The 79 280ZX trans was more similar to the 75-78. 80-83's were a different trans. Any crunching of synchros afterthe rebuild? Is that $600 Canadian?Where are you located?Marty Link to comment Share on other sites More sharing options...
jaroslav Posted November 23, 2004 Author Share #5 Posted November 23, 2004 Im in Cambridge Ontario...all my asking prices are US. Link to comment Share on other sites More sharing options...
jaroslav Posted November 23, 2004 Author Share #6 Posted November 23, 2004 NO crunching...a bit stiff. Link to comment Share on other sites More sharing options...
Marty Rogan Posted November 23, 2004 Share #7 Posted November 23, 2004 Where the heck is Cambridge Ontario? Do you know if there are duties charged on used auto parts? Link to comment Share on other sites More sharing options...
jaroslav Posted November 23, 2004 Author Share #8 Posted November 23, 2004 Near Toronto, You may want to confirm what the duties are at your end...its the US government asking for the $$$$$$...probably minimum duty on old parts.....if any. Link to comment Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now