Australia & NZ
578 topics in this forum
-
- 5 replies
- 2.5k views
Hi guys, its been a while but I am gradually getting some work done on the Z. After much bashing and damaging my spare suspension arm, I decided to knock myself up one of the fabled spindle pin pullers. In the process of doing so I am left over with enough high tensile steel threaded bar to make two more of these. They are nothing fancy, basically a bit of CDS tube capped with a welded on washer or two at one end, a wheel nut welded onto a bit of threaded bar, you simply wind onto the bit of the pin sticking out, then tighten the nut on the other end and it is gradually drawn out. On the prototype I have now pulled out 4 spindle pins, and it still appears fine and damage…
Last reply by Z Kid, -
-
- 0 replies
- 1.3k views
Wtb Left hand side Window Reg for a 74 Datsun 260 Pref In QLD close to Bris/Gold Coast Pm me or email kingoffoxes@gmail.com
Last reply by Deus Ex, -
- 0 replies
- 2.5k views
For Sale, Triple 45mm DCOE Webers Extremely rare these days, these three matching 4mm DCOR Webers with polished manifold, linkages and trumpets to suit Nissan L Series. Webers have been well looked after and tuned by CnJ Motorsports in Brisbane. Currently runs 2.9L L Series with Aggressive Cam. Specs are as follows. 32 venturis 200 Air correctors F16 Emulsion 120 Mains Currently Running on the car so they are viewable in working order, the sound is amazing. Asking 3k ono - Gold Coast
Last reply by Deus Ex, -
- 0 replies
- 1.3k views
http://www.classiczcars.com/forums/showthread.php?t=22269 Nissan Datsun Sports Owners Club 2007 national meeting at philip island at easter. Tom.
Last reply by Tommo560, -
- 1 reply
- 1.6k views
Hey anyone got a turbo rocker cover they want to part with? Cheers Jake
Last reply by hls30.com, -
- 0 replies
- 3.1k views
hey hows it goin i need a cheap front bar that has all the black plastic bump strip on it mine was wrecked by a kanga****in roo and the cheapest i've found so far is just not cheap at all so if ya have one laying around call me on 0428893068
Last reply by Marty260z2+2, -
- 6 replies
- 2k views
looking for a talented glasser in aus that might be able to help me with making a 3" cowl bonnet. anyone have any suggestions on where to start? i have checked out all the US ones but they are all 3.5" + and rather ugly imo. 3" is high enough. cheers
Last reply by That Ozzy Guy, -
My 240z for sale 1 2
by halz- 15 replies
- 4.5k views
Crunch time... A change of job means that I now have even less spare time to lavish the care and attention on the 240Z that I would like to. Much as I do enjoy driving and tinkering, the car deserves an owner who will use it far more than I do. So... If you are looking for a '73 240Z with original interior/exterior and matching numbers, a car that has never nbeen in a crash in its life, with an E31 head, extractors and sports exhaust then have I got the machine for you! Follow the link below for more details (and please don't try to talk me out of this I might just weaken!) Hayden. http://www2.carsales.com.au/used-cars/private-search-results.aspx?category_id=3&…
Last reply by That Ozzy Guy, -
- 6 replies
- 3.6k views
hey ppl i'm guessing its trhe logical step to ask, where would be the be place to find 2 complete side inidicators? i've checked Rare spares....and i'm thinking if they don't have em not many other place here would.... i'm down in Tassie and i was wondering if there was anyone wid a spare set or knows some who does or wreck's the 260z oh n are they different for a 2+2 i'm assuming theres not....but aye it is a car after all mine have pretty bad rust took 25 minutes to get one of the globes out hahah well i hope to hear your idea's on this matter cheers. Marty
Last reply by Marty260z2+2, -
- 5 replies
- 2.1k views
Hi all can anyone please tell me where i can get parts for a 280ZX in Geelong. I currently do a hell of a lot of buisness with Z Worx in Mordialloc but they are too far away and the parts take too long to get here (even though they are very helpfull). Any help is apreciated
Last reply by a7dz, -
- 0 replies
- 2.1k views
I'm selling a set of 5 rims with 'Z' centrecaps and all the nuts you need, plus a few extras. Some with bald tyres, some without. $150 firm. Also, a set of 4 35mm bolt on spacers and longer wheel studs to fit Silvia rims to the Z. I ran a pair on the front for a year with no problems. Never put them on the rear because I needed to fit the longer wheel studs and it's a little harder on the rear. So 2 are un-used. $200 firm. There is a pic in my gallery of my (old) Z with silvia rims on the front. Help me clear out my garage!! I need the room. Located on the Gold Coast Scott 0414 339594
Last reply by speedyblue, -
- 25 replies
- 6.2k views
For once, we have a good event coming up in Queensland! WHEN: Sunday the 1st October 2006 WHERE: Bald Hills Flats Pine River Park, Strathpine, Brisbane, Queensland. WHY: Dear Japanese Motoring enthusiast, The Inaugural Classic Japanese Show and Shine is now open for entries, For more than 50 years the Japanese automobile industry have designed and built motor vehicles that have graced our roads and had a huge effect on the Australian economy and our every day lifestyle. The Japanese motor vehicles have also had a huge impact on the automobile industries of the world. The car of the 60’s, 70’s and 80’s and even right up to the present day have been in the for…
Last reply by 260DET,
-
Recently Browsing 0 members
- No registered users viewing this page.
Mark Maras
