Alfadog

if you have 10k saved up you could go right out and buy a pristine one with all the resto work already done...

Congratulations! Hope it went to a good owner

Turbo six? I guess you're talking about someone doing a swap with a 280ZX Turbo, Skyline turbo or maybe 300ZX Turbo engine... cos you DO realise they never came stock with a turbo dont you? It'd be pretty rare to find one still, and even if you do, my bet is it wont be cheap.

I was thinking of moving to 215s personally...

those prices seem to represent Australian Z cars also... only difference is those are AMERICAN dollars... So I guess that means Z's are worth double the amount over there

Where should you put the jack then? Say a Z has a frame rail which was rusted out from the inside and then someone put a jack undeneath it and the frame rail crumpled right through and put a crack in the floorpan. The rail and floorpan need replacing but not on the other side. How expensive would that job be?

you make me want to move ot england! :cross-eye :cross-eye :tapemouth

ROFL This is the Z car forums not the Volvo forums!!!

If the colours for the Z didn't change between 1970 and 1971 then the 1970 chart is what I want. Basically Im looking for the silver Datsun offered for the 240Z in 1971..... thanks !

Is it a 17 piece kit? If so, Victoria British sells that kit for $189 USD... so maybe you should ring up Z Parts or whatever the place in Sydney is called and ask how much they sell their kit for?

700 bucks for new rubbers all around? A complete set?

Are all Zs' indicators so sloooow?? Mine stay on for, say, a bit less than 2 seconds, and go off for about half a second. It seems very slow... ricers adjust their indicators somehow to make them flash on and off really fast, so one would expect the mod to be cheap and quick. Is that the truth?

I find it much more gratifying when some bloke comes up and goes "I USED TO HAVE ONE OF THOSE! NICE CAR MATE!" :D:D

Guards! Thats what he calls them I think fender is just a cooler word thats all That said, I strive not to use any other Americanized words (ooo thats a subtle one )

Well 1B6, what did he suggest using ?!

The problem is the doors sit fine near the hinges but on the other side (where it opens its out of whack, so no matter how you position it it wont be right. Dad calld them wings or something - whatever the "proper" word for them is

Here's a tip - don't email those blokes - they never check their email!! Ring them up its far more efficient

I'll be in Toowoomba tomorrow if that is anywhere near YEPPOON! If so, erm, well, nevermind! I'm going to be busy all day anyway Dont worry mate NEXT year at easter I'm sure well all meet at Toowoomba for the national Z meet!!!

Mine is an ERPS system, but I never knew there were any others. Maybe the cheaper system works just the same! Maybe you should ask the blokes at the most expensive place WHY exactly theirs is more expensive.

I've got a story about a Scottish nurse at a hospital I will share with you. And it's true! A patient (we'll call her Mrs. Wicker for the story) in was very sick in the Hospital because of some sort of bladder problem where she couldn't urinate very well or something (sorry I'm no doctor as you can see!). Anyway, the nurse took care of her for a long time and this one doctor regularily saw her. Anyway, one day as the doctor was coming in the nurse took the doctor to the side and told the doctor, "Mrs. Wicker passed a wee!" "Well that's fantastic", the doctor said with real enthusiasm The nurse was utterly shocked - "She just died and youre happy?!?!" The doctor was my mum ROFL

No one's going to take pictures of the bad spots mate

Surely the Z Workshop can get you some?

Should the L24 start first time when it's cold without the choke? If so, arghhhhh!

okey dokey! I was going to do that anyway, cos I read it (possibly you said it) in another topic about rust prevention... Thanks guys! I'll keep you posted