Anyone know where I can get them, or knwo about the Lug Nut pattern?

I would love to see this wheels on my 280Z

I'm pretty sure that the Skyline GTR wheels were 5 stud. If you were in Australia getting these would be fairly easy not sure how you'd go about it in the US.

Good luck

You can get them from an import shop I'm sure they'll find them for you.......... and yes they are nice wheels. 5 stud yes.

One problem though... they're EXPEN$IVE

Of course there is a five lug conversion for your Z.

Saw a set of ADVAN's on a ricer at a Honduh show this weekend which looked very much like that. GORGEOUS!!!

steve77

they are 5x114.3 as most jap cars including skylines are nowadays...

I've seen a perfect set with 18inch tyres go for 4k, another set for 3.9k that is in australian, and thats the basic price for new 18inch wheels..

I'm sure you can get copy's but i can't see them look as good as these rims..

The size is 18"x9" and the tread pattern is 114, 3x5. Offset +30.

i'm trying to get some from an UK GTR forum right now... having some luck...

but I got from the SR20DE forums that

Actually you may not need big spacers. I think they may only be +10 offset. If so you can just run 1st gen 300ZX front hubs (5 lug), and get the 5 lug conversion for the rear and small spacer. You will probably need coilovers though and you really cant go bigger than 17's on the Z's.

is this true?

Owned by Mr. Tetsu Takakamo.... a big Z car fan

found two horrible pics.. thats it

I know they make a conversion for the rear axels, but what about the front hub? I am assuming that it too will need some welding? Anyone with some advice? (by the way, Those Skyline wheels are tight on the Z!!!)

Thanks

Brian:alien:

here is another pic i found....

and another.....

i think it looks pretty good on a zx Imho...

sweeeetttt!!!!