Sent from my iPhone using Tapatalk

The rear quarter cut pretty far hitting partical onto the rear lights and I believe into the door

Sent from my iPhone using Tapatalk

What's your question? It looks like someone was planning to install aftermarket quarters. I used to have 20+ set of those but sold them over the years. Are you in Centralia, PA?

 

Chuck

I live in centralia Washington and the car panel was used on on another datsun and the guy ended up screwing up when welding in onto the other and my question is that it cut part of the door jam and rear light bezel on the passenger side

Sent from my iPhone using Tapatalk

So what should be done to fix this cause im planning on buying this car before it gets parted out

Sent from my iPhone using Tapatalk

Can you provide a closer picture of the area?

I will later today if i go and get it

Sent from my iPhone using Tapatalk

Saw this on CL too. I was shocked that someone had cut the quarter panel out of her. If it's complete & relatively rust free, go for it. If you need a quarter panel, there is a wrecking yard south of Portland that has a few Zs. PM me for Info.

You'll probably have to get a quarter from a donor car. Repairing it shouldn't be a big deal. But if the rest of the car needs a lot of metal/rust repair then I'd pass.

 

Chuck

That really the only bad spot besides a quarter inch of rust under the door but besides that really clean

Sent from my iPhone using Tapatalk

What's your question? It looks like someone was planning to install aftermarket quarters. I used to have 20+ set of those but sold them over the years. Are you in Centralia, PA?

 

Chuck

Funny...Centralia, PA is the first thing I thought, too.  Of course, no one lives there because of the mine fires...

Ahh yeah just the plain jane Washington

Sent from my iPhone using Tapatalk