Will a full 260 (2 seater) exhaust system fit onto a 240 with no mods, i.e. headers+full pipe + muffler?

If the head ports are the same shape --- no problem.

- Jeff

the 260 should still have the square exhaust ports and should fit accordingly.

have at it

Not worried about the headers, more concerned that the piper work behind will line up with the brackets under the car. I'm hoping to buy the full system off a guy who is doing a v8 conversion..

except where it would come off from the header or original manifold

The only thing I could think of is if your 260 has a rear anti-sway bar and the 240 didn't. Reason being in my 240 I had a custom 2.5" exhaust made. At the time I didn't have the sway bar. A few months later I added the sway bar and it rubbed against the exhaust. Nothing a BFH couldn't fix.

Originally posted by Ed

The only thing I could think of is if your 260 has a rear anti-sway bar and the 240 didn't.

240's did over this way

Question is Ivan, did your 240's have the front mounted bar vs. the rear mount bar? Or were all the 240's and 260's the same over there.... We had two different mounting positions for the rear sway bar, one in front of the axl, with the mounts on the rear of the floor pan, and one that mounted behind the diff. That would be the only difference I could think of....