Anyone have a drawing of a 240z rad including mounting brackets?

Thanks in advance

Rolf Arne

Carpartsmanual.com has a good selection of drawings. Look in the 240 engine section.

Mine bolts to the radiator cross member, without any brackets.  Here's the microfiche, http://www.carpartsmanual.com/datsuns30/DatsunZIndex/Engine240Z260Z/Radiator/tabid/1592/Default.aspx

 

If I can take some pictures for you let me know. 

Forgive me guys if I'm incorrect, but I think there might be some confusion about what is being asked for here...

 

Rolf, You're looking for a dimensioned mechanical drawing (a "blueprint") for the radiator, right?

 

If that's the case, I don't have what you're looking for, but it might help others understand what it is you are asking about.

 

Mine bolts to the radiator cross member, without any brackets.  Here's the microfiche, http://www.carpartsmanual.com/datsuns30/DatsunZIndex/Engine240Z260Z/Radiator/tabid/1592/Default.aspx

 

If I can take some pictures for you let me know. 

Okay, I'll rephrase.

If I can take some measurements for you let me know.  I have the OE '72 radiator hanging on a nail in my garage.  I've installed the larger 280 radiator in my 240.  Fits great although it's 2" lower to the ground but still not as low as my front spoiler.

Sorry for bad description, I have try to find a " blueprint " but its not longer needed. The shop manage to find what they need.

Thanks for all offers in helping

Rolf Arne

Rolf, Don't apologize for the description. I don't consider it bad and I doubt anyone else did either.

 

In any event, glad your shop fixed you up!