Anybody have a spare shifter for a 280Z 5-speed? They appear to be unobtainium.

I’ve checked with several Z used parts sites, the CZCC classifieds, Craig’s list and ebay. The MSA short shift kit is on 3 month back-order.

Thanks!

I would check with the Z Barn in Knoxville Tn. 800-247-2793. Roger Schmidt

Am I missing something here? I thought that all the '72-78 manual shift levers (both 4 & 5 speeds) were the same. Should be easy to find.

all these shifters will fit, but most from a 280z 5 spd has a shorter pivot length. The longer pivot length will work but I recommend lightly hitting certain areas with a grinder so the longer pivot length will clear the shift rod.

I have 'a' shifter lever but I am not sure what it is from other than a 280Z

I will check my storage unit tomorrow... I may have a shortened lever that is powder coated that I ended up not using.

Darrel,

I had tried to view your shifter pics on the Hybrid site but was not able to. I'd like to see exactly which portion you were referring to that needs to be ground off. Any chance of posting those pics here?

THanks.

I uploaded the pic, but is pending approval.

If you want to see the marks, install your lever and move from 1-2 a few times, or if you already are using the lever with the long pivot, you will already have the marks showing.