Ed
Free Member
-
Joined
-
Last visited
Everything posted by Ed
-
Just two questions. Why are you replacing them? Have you found a correct replacement?
-
Are you building the engine in your living room? -
Nice work! Real clean looking. Excellent. One suggestion, block off or put a hose on the float bowl vent tube's. I have seen them spew fuel. And if your headers are really hot---- fire, fire. -
-
If I remember right it's in the hardware section. They have a section with little drawers, where they have nuts & bolts and washers. It should be there. Another place to look is a Sears hardware store. They have an extensive selection of springs.
-
Home Depot. I got some there identical to the OEM one's.
-
This beauty was out of Ohio. I talked to the owner and it's a Robello built engine. Dyno'd at about 290 HP at the flywheel. -
23 cars qualified for a chance at the gold cup. -
These two 240Z had over 280 points. -
It feels a little funny having the judges going over your car. -
-
The judged cars were inside. -
People's choice was outside. -
-
I believe it was mentioned earlier in another post. About 400 lbs. with the head.
-
No, I moved the hooks there. I wanted them out of sight and still be able to use them to tie the car down on the trailer.
-
-
Thanks for the compliments guys. I get a grin from ear to ear everytime. Here are some more for you. It's a nice sunny day so hopefully they are not too bright.
-
You should get the cam reground, install resurfaced or new lifters. Try DeltaCam .
-
1) The headers are MSA 6-1 with the Jet Hot coating. 2) Clean, polish, paint. They were 100% rust free. No. Ed
-
Check with your local auto parts store. In the "Help Me" section they sell replacement caps.
-
I agree, use new head bolts. MSA sells them also try your local parts store.
-
With that much paint your better off stripping her down to metal. Todays paints are better than the one's of the 70's, 80's and 90's. Use some 80 grit on a 12" disk. The bigger the disk the better. Then get some good primer on her before you start the metal work. Or you can do the metal repairs first then strip her and do the primer just once.
-
Those are the tie down hooks that originally come on the bumper supports. I moved them out of sight. I use them when she goes for a trailer ride. -
Those pedals were custom made. I provided the drawings and they were made out of 1/4 polished aluminum. They are for sale if interested.
