nix240z

I like both teams but I'm going Seahawks, since my Brother is a pilot for the teams owner.

Thanks Chas, let me know when you would like to order, I will give a discount on a multi item order. Jim. D aka Zup the wiper linkage boot is now back off the car and getting ready for reproduction. Should be done in a week or so. Steve

Maybe they figure if you buy a new Cheap kitchen from the Uk, then the wife will let your buy Zcar parts?

made more 240z rubber parts, I now have over 40+ parts in the webstore and I am always adding new parts. Datsun 240z rubber grommets & parts steve

Another small item that is missing 99%-100% of the time and you don't even know it. Look at your Escutcheons and you will see the hole. Door handle Escutcheon rubber bumper. Escutcheon not included rubber only.

they will be back in stock tomorrow. In the molds curing overnight. Steve

For anyone looking for the correct pump rubber insulator mount, I have them. Washer Bottle Pump Insulator/Mount Steve

Jim, wiper linkage boot is still in my plan. I will have to take my wiper assembly apart to get a sample for the mold, I am trying to put my car back together not take it apart again. The rubber gaskets for the air cleaner housing is too big of an item for my pressure pot, I have a 40 liter pressure pot. Steve

Thanks, I never noticed how many little rubber parts there is on a 240z until I started reproducing them for my restoration. Steve

washer bottle motor cover insulator. check website for other new and up coming items.

Yes, great find... hard find these days, even on eBay...last few sets have been in the $400 to $600 range.

This is listed as a 69 240z taillight, which it is not. I sent seller info on what it really is. what is your guess? before they correct it. 1969 Datsun 240Z Tail Light Lens RH SAE I Str 69 | eBay

Engine bay light replacement lens and matching rubber seal. I am also working on a few other new items.

I am working on a custom set of insulators for 240z's with a over sized return line, which will be the same size as the main fuel line. any other interest in these custom insulators? I have to machine, mold and cast the new custom insulators. The price will be more than what the regular set of insulators are and that is $150. also working on the engine bay light lens and the rubber gasket plus the wiper bottle motor rubber mounting insulator. Steve Datsun 240z rubber grommets & parts

The stretch test is complete and both regular Super Glue and loctite 406 worked great. There should be no problem gluing the grommet back together. Just don't get the glue on your fingers because you will be glued to the grommet.

turn signal wire insulators are $20 a set... I am also working on the gasket for the socket. This is the location for the handbrake dust boot looking from the rear forward, it is on the left side of the transmission tunnel

front turn signal socket wire insulator. Datsun 240z rubber grommets & parts

Handbrake dust cover in transmission tunnel. Datsun 240z rubber grommets & parts

I machined the part yesterday and should have a test sample in a few days. steve

are you referring to the rubber boot on the front turn signals that insulates the 3 wires on the socket? if so I believe I can. Steve

update on the firewall speedocable grommet. The grommet is done and I am testing the glue to hold it together after cutting. Regular superglue works fine, I have the grommet glued back together and under a stretch test of 150% of the cable size, to see if it comes apart. I have also ordered some loctite 406 which is made for rubber and high heat. Once I complete the tests I will report my findings. Steve

that speedo has a later style firewall grommet, I have the same speedocable with orange outer rubber and spring that is NOS form the early 90's I had stashed away. Very nice find...

Sorry I dont think I can help you out on these. Dan, it is the circled part..

another NLA part. I had a few request for this part. Any other interest in the dust boot for the handbrake in the transmission tunnel? I machined up the part and ready to mold and cast. leftside is the machined part and rightside is the original. Steve

mid 80's working on 240z and a new 84 300zx turbo..