zKars

I have recently fallen in love (metaphorically) with a smoke machine lately. Very good at finding leaks. Used it on gas tanks…. Mine has an internal compressor that build lots of psi in the system of choice. Reasonable affordable. Uses mineral oil. Bit hard to see small amounts of leaking smoke, have to use a bright light and lots of different viewing angles, it doesn’t make the huge volumes of dense smoke I expected, but still very effective. I also envisioned using a thermal imaging camera at the same time to show a visual map of the leak location, will report on that some day.

Half shafts across all years are the same replaceable snap ring retained ujoints.

They are black M4 x.7 yes. Oval head is what I believe they are called, not flat, slightly curved face. Phillips or JIS equivalent driver. Fairly long, like 25mm?

It is just a hole, normally has a rubber plug in it. I have used it to mount seat belt retractors with proper re-enforcement underneath where it exits through a frame box member.

E31 is “right” for your 71. N42’s were from 75 onward. E88’s were 72-74

Sure thing!

I snagged one of the earlier Nismo Safari Z Seiko’s back in 2023. They were a bargain at $299. I’d completely forgotten about it until a friend mentioned this new series and asked if I seen the news about it. Maybe it will be worth $399 at some point….. duPont REGISTRY NewsNissan x Seiko Debut The NISMO Safari Z Watch At SEMA, Li...When it comes to honoring motorsport history, Nissan knows how to do it in style. At the 2023 SEMA show, the JDM legend took the wraps off the new Nissan

I’ve never had much respect for the Chilton or Climer (sp?) service manuals, once I realized they were nothing more than stolen excerpts from the real service manuals and how they claim to handle all Datsun Z models from 1899-2050 in one book. Talk about cherry picking and massive omissions I thought Now that the real manuals are available online, I rarely look at them. However, the other day, I got a Climer manual with a parts horde and happen to flip through it just to see if I was missing anything. I might have to eat my critical words, when I found a compilation listing of what seems to be ALL the possible timing options 70-78. “Maybe” they did a bit more than just decide which pages of the FSM’s to include. This was sparked (see what I did there?) by a Z friend with limited Datsun knowledge who was asking me about timing specs for his 71, telling me he looked on line and found really wildly varying numbers and couldn’t decide which one was right. Well, there you go. the list shows a large variation depending. PS. It also has a pretty high quality set of schematics for the various years and transmissions all in one place. I read most of the text! .

I do have some used dampers. Happy to send one your way, Early 240 2 pulley or later 280, again 2 pulley I recently purchased a Dayco damper from Rockauto. Pic below. Option 3 is send yours (or mine) to DamperDocter.com for rebuild

I was very lucky to find a full set of 4 carpet clips in a recent parts haul. Never actually touched one, vaguely remember a thread here about them 74995-E4100 Qty 4 in the fiche. Three are nice enough to use, yellow zinc plating is pretty good, but one is a rusty mess. Usable, could just sandblast and spray yellow zinc. I see SS reproduction sets on some of the usual vendors. JDM-car=parts has a OEM refinished group of 7 for $99 USD. Asking $50USD for my set of 4 plus postage.

This is a spread sheet of what I had couple of years ago when I tried to sell on Facebook. Not many left the building…..

I have an embarrassment of riches when it comes to standard A11 600 000 ECU’s for 280’s. Can’t ever see using them all locally, so anyone interested in picking up a “Few” in the USA where you can distribute them from there to those that need? Asking $50 each. Ask me for volume discounts….. There are a few ZX turbo, both 280 and 300 if that suites your fancy. I can try to build a list. Similar situation with AFM’s…..

Your hard starting issue sounds like a problem with the fuel mix not being rich enough. Are you using the choke when you start it? Make sure both jet tubes under the carb get pulled down all the way when you pull the choke handle back all the way. Check that the fuel mixture nuts under the carbs are turned down 2.5 turns at least, and that the float levels are correct.

47 thumbs up for precision shims in Auzzie land. Flat and recessed bottoms.

Only 7…. All used, you’re welcome to a decent one