The  PO removed the banjo and fuel inlet fittings to the Su carbs on my 71 240z and put on some funny looking  braided hose junk. I would like to know if anyone supplies the original ones. Been looking but have had no luck

3 or 4 screw?

These are more like OE.

https://www.ebay.com/itm/403077170180?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=403077170180&targetid=1263104805766&device=c&mktype=&googleloc=9012727&poi=&campaignid=14859008593&mkgroupid=130497710760&rlsatarget=pla-1263104805766&abcId=9300678&merchantid=101700549&gclid=CjwKCAiA8bqOBhANEiwA-sIlN42V_XziCWmOS-Q-036aB9hg8MK3IZnEMngEvh-YJtVBxWZuCphkdBoCmeEQAvD_BwE

google search...

https://www.google.com/search?q=240z+carb+banjo+fitting&rls=ig&sxsrf=AOaemvI2q8ucjgPsig0RfgQEHB8piUrLTw%3A1641000958271&source=hp&ei=_q_PYd-VDqeFwbkPiNeN4As&iflsig=ALs-wAMAAAAAYc--DnGSpDwWb36lAXIaLVNyyMO-Ia9D&ved=0ahUKEwjfjMT5tI_1AhWnQjABHYhrA7wQ4dUDCAo&uact=5&oq=240z+carb+banjo+fitting&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOg0IIxAnEIsDEKgDEKYDOgcIIxAnEIsDOggILhCABBCxAzoICAAQsQMQgwE6BQgAEIAEOg4ILhCABBCxAxDHARDRAzoICAAQgAQQsQM6BAgjECc6CwguEIAEEMcBEKMCOg0IABCABBCHAhCxAxAUOhAIABCABBCHAhCxAxDJAxAUOgUIABCSAzoFCAAQsQM6BQguEIAEOgoIABCABBCHAhAUOgYIABAWEB46BQghEKsCOggIIRAWEB0QHlAAWOFkYO1taABwAHgAgAGFAYgB9RCSAQQxNS44mAEAoAEBuAEC&sclient=gws-wiz

Also the rear is bent towards the radiator from I remember but I think you could use the same ones front or rear.

ztherapy.com has some I'm sure. They're not on the web page but if you call them they would be able to sale you some I'd bet.

Edited January 1, 20224 yr by siteunseen

3 hole carbs. Photo of what he put on. I will give Ztherapy a call Monday thanks

On 12/31/2021 at 7:53 PM, billgtp said:

The  PO removed the banjo and fuel inlet fittings to the Su carbs on my 71 240z and put on some funny looking  braided hose junk. I would like to know if anyone supplies the original ones. Been looking but have had no luck

Last year I removed my banjo bolts and installed some braided hose junk. Now you made me feel bad...

: (

He put on what looked like pep boys stuff with the screw clamps. If it was earls or russel with correct fittings I would leave them on.