Hi,

Does anyone know where i could get a set of pistons (12010-P7917) and rings (12038-P7910)?  Everything i have read says these Nissan parts have been discontinued and I am just looking for a good replacement.  Thank you for any assistance.

Clay

ITM Pistons are fantastic.....I don't like their rings. I use Total Seal Rings with the ITM pistons.....just toss their rings. These are 1 mm ITM's in an L28 block. Nissan may still carry the .040 over (1 mm) rings. If so, you can use them with the ITM's.

We've been using the ITM pistons in our race cars and they've held up well.

 

Chuck

 

Great.  I will call Nissan and see if the rings are still sold and get some ITM's on order.  Thanks for the assist.

Clay

I used Itm pistons for my L28 build but bought rings from Hastings.

Itm pistons are good but their rings arent. Thats the info i got from people using Itm.

Awesome info guys thank you very much.  I think I've narrowed what is needed down to two part numbers:

ITM Pistons - RY6134-040 (piston kit for a 87mm bore)

Total Seal Rings - T2416 (replacement rings for 87mm bore)

Thanks again.

Clay