Sealing an oil pan

17 hours ago17 hr

comment_677092

Hi @Yarb ! Thanks for the link. I like their oil pan and it is cheaper than the Japanese one.

Do you have any feedback?

What kind of gasket did you use? Cork, rubber? Sealant?
Does it come with the oil pickup? I didn't see it in the description. Do they provide new bolts?
How deep is it vs the stock one? Any issues hanging too low to the ground?
Any clearance issues installing it?
Leaks?
What did you do with the oil dipstick?

Thanks!

Edited 17 hours ago17 hr by darom

Link to comment

https://www.classiczcars.com/forums/topic/52349-sealing-an-oil-pan/?&page=7#findComment-677092

Share on other sites

Remove Ads

16 hours ago16 hr

comment_677094

Mine was installed by the builder. Looks like a standard Nissan gasket. He used Allen head screws for the install. Didn’t mention anything about a new pickup tube and the dipstick appears to be the same. You can contact AZC and they can answer any questions you have. It’s a very nice pan.

Link to comment

https://www.classiczcars.com/forums/topic/52349-sealing-an-oil-pan/?&page=7#findComment-677094

Share on other sites

16 hours ago16 hr

comment_677095

5 minutes ago, Yarb said:
Mine was installed by the builder. Looks like a standard Nissan gasket. He used Allen head screws for the install. Didn’t mention anything about a new pickup tube and the dipstick appears to be the same. You can contact AZC and they can answer any questions you have. It’s a very nice pan.