I won't miss any detail,but for now it is really hard to make even 95%-accurate,but we'll see

So guys if you gane fully disassembled body,let me know.

I see, basically i am in need of a 3d model to work off with some extreme body modifications, i was considering 3d scanning but if you believe your model will be externally accurate i will hold off. Wish i could help in some way but my modeling skills are limited.

if you have fully disassebled body*

--

Decided not to make retopology,but to fix the overall geometry.

Could you please take photos of these parts?(More views desirable)

Also rendered a bit..All the cracks and bumps that are seen on these 2 are fixed.

Some rad support and inner fender details on these pages:

http://www.classiczcars.com/forums/open-zcar-discussion/34681-x-ray-view-internal-body-cavities-240z.html

2009 240Z build : Classic Z General - Page 15

http://bringatrailer.com/2011/09/01/put-right-early-vin-1970-datsun-240z/

240z with RB26DETT, multilink, EPS, etc - S30 Series - 240z, 260z, 280z - HybridZ

Goonfan's 72' 240Z Resurrection build - Project Datto - Ratsun Forums

FuFu'Z 240Z Project! 56K warning... too slow.

http://www.classiczcars.com/forums/open-zcar-discussion/25643-total-restoration-project-71-a-7.html

Not the best quality on my pic's, and i hope the link works.

If you want clos ups on something maybe i can help, my 240z project is just a shell right now.

Really impressed by your work.

https://plus.google.com/u/0/photos/108156140387550234130/albums/5864821097512483985

Guys,I really appreciate that a lot!Thank you!The links are extremely helpful

a plenty of renders!YAY

also haven't find a single photo of this part.

any help would be appreciated

Looking good!!!

Some reference pics

Here are some pictures from the engine side of the radiator support though the PO undercoated the engine bay which may make this too dark to be useful.

Driver's side:

Here's a few of the inside.