Thanks for the tip, I'll definately check that out since at around $45 each time 6 plus new 0 rings, etc I'll be spending a few hundred bucks for everyhting and ever little bit helps.

I have a set of the BWD injectors and made up a flow checking test rig. The new set I got from O'Reilly a few of years ago all flowed equally, definitely within 5%, an indiscernible difference after about 6 ounces of gas per injector (half a Coke bottle).

I'd bet that the rubber seals come with those. My Standards did and they look exactly like the BWDs. Probably made at the same place. Look at the pictures on post #12 http://www.classiczcars.com/forums/thread45474.html.

Guys, anybody knows if the 300zx N/A injectors are the same of the 280Z and ZX? I´m looking for the injectors and somebody is offering me 300ZX intended ones....

Edited October 2, 201213 yr by mazingerz1976

They will work if for a z31. Hopefully they were ones that were replaced on a recall.

They will work if for a z31. Hopefully they were ones that were replaced on a recall.

Thanks Darrel, I need them for my 280ZX.

...I bought cheap ($155/set Standard Ignition off Ebay). They've worked fine so far (nearly 2 years as my daily driver).

I bought the same injectors off Ebay. Car runs better than ever.

Be sure you read this thread on injector replacement before you start:

http://www.classiczcars.com/forums/thread47184.html