Anyone have a picture of the proportioning valve on a (10\70)71 240? I believe its different than the 73 and mounts in back. If someone has picture of the valve and/or picture of how the hard lines are routed to it, it would be very helpful. Also..the brake warning switch is still mounted on the driver side of engine compartment right? Thanks.

Brian

Ayar or more ago I couldn't find a prop valve for my 1972 Z. I got an adjustible valve and it works great.

Here is a photo of the back lines on a 7/70.

Brake warning switch is on the drivers side, below the brake booster, mounted above the frame rail.

Bonzi Lon

Thanks. Looked again tonight and couldnt find valve so I guess I'll order the adjustable one from msa.

It is in the photo I posted (blury) but it is the right most block that the lines go through before they hit the "T".

Thanks blue. I see it there. Just ordered adjustable one from jegs for 40 bucks. Guess I can mount it there or in the front somewhere. Might be easier to get to in the front. Picture helps and I appreciate it.

Brian

In the front is best and having the control near the ebrake makes for an ergonomic racing set up.

Have fun!

Is the brake waring switch the same between 71 and 73? It appears to be the same.