well the reason i was askin is there is a 1980 280 zx near me tht the guy wants little to nothing for,i am hoping the pressure regulator is the same, and its a five speed as well so if the cover is good its yours. then u wont have the weld marks or grind marks

Am parting a 77 california emmisions 280. Lots of rust but the computer and wiring is still there, as is running engine and good trans. Am in N.Idaho and parts are in car, but will help a member if someone needs something.

Well, a used 280ZX heater core magically appeared on my doorstep. It doesn't look rotted, but it'll be up to you to test and/or repair it prior to use.

Am parting a 77 california emmisions 280. Lots of rust but the computer and wiring is still there, as is running engine and good trans. Am in N.Idaho and parts are in car, but will help a member if someone needs something.

Would you have a pair of A frame interior covers??

I'm looking for a front engine-hook (the on that goes on the front of the engine near the mechanical fuel pump that I can use for hoisting the engine out) for my '72 240z. If anyone has an extra laying around & wouldn't mind passing it forward, I'd be eternally grateful. Thanks.

I ended up with an extra set of injector seals, if anybody's needing. How about $15 including shipping?

I NEED an extra injector mount, aka "pedestal" if anyone's got one

Wade 970 7 five nein 797 (nine minus one)

OK, all. Bunch of parts from a 78 2+2 I just parted out. Selling the big stuff (go see my ad in the classifieds ), but any and all this is yours for the cost of shipping.

Complete engine bay harness. Almost unmolested, few cut wires but mostly intact.

Complete dash harness, no obvious damage.

I'm selling an AFM if anyone needs it. It came off a running (about six months ago) so it did work. (I've had it stored since then). PM me if interested.

Jan

You mean an air/fuel meter? If so, I'll take it. Going to PM.

You mean an air/fuel meter? If so, I'll take it. Going to PM.

Yup that's what I mean (PM has been sent)

AFM can be:

Air Flow Meter: device used in stock L-Jet EFI to determine engine load.

or

Air Fuel Meter: a gauge that outputs an 02 sensor reading from your exhaust stream.

Totally different things.

Leon V yup we were talking about two completely different things. I was indeed speaking about the air FLOW meter not the guage.