I don't have much time and I need to get this car back to storage!

I need the steps to set the idle for both carbs.

Also any tips with fuel Bowls. I would but just su you DVD but I need the car back to storage by Friday night!

Search this site for carb tuning tips. Plenty of previous posts on this topic, anything I could post here would simply be a duplication several times over.

Yea I have tired sreaching some confusing and found alot of post that were not very helpful

Buy a carby balancer and have a flat blade screw driver handy and do some research..

The carb tuning instructions in the factory service manual (FSM) are pretty much the same as on the Ztherapy video. I think some of the FSMs are available online. If you do a search you should be able to find the link to where they are posted.

You will need a carb sync tool, like this Uni-syn http://cgi.ebay.com/ebaymotors/EDELBROCK-UNI-SYN-Model-A-MULTI-CARB-SYNC-TOOL-1-00-NR_W0QQitemZ220463510762QQcmdZViewItemQQptZMotors_Automotive_Tools?hash=item3354a634ea&_trksid=p4506.c0.m245 and a long flat blade screwdriver.

-Mike

By the way, do not try to adjust the idle speed without synchronizing the carbs. Just turning each screw the same apparent distance each time does not work.

yes I do need a carb balance tool! I know there are few kinds out there

I have the 260 FSM and the old old 240z ones which is like 7 book unlike the 260 which all in one book!

Watch these videos as well. This guy does a decent job of explaining SU tuning.

already watched those but thanks!

I got a uni-syn today I think it got it right but the higher RPM balance is little harder for me