Hey guys

I was thinking about building a 3.1 stroker motor, if not a 2.4 bad arse motor for my 71, and i was looking into heads and i don't have a clue what head is better the P79, E88, E31, etc. could someone who knows about heads spoon feed me the differences. Thanks

I have an answer, but as much as I believe it is right, it isn't really the answer to your question...:eek:

Anyway...

Look at Bryan Littles Z Garage-from what his experience and practices show, a P90(P90A-if you want quiet) shaved and shimmed is the best in the evolution of the common factory L6 heads. His coverage of the differences in the heads will probably give you what you are looking for in terms of comparison-I'll post a link unless someone beats me to it...

Will

head link...but check out the entire site-it's that good!

http://www.geocities.com/zgarage2001/z.html

AHHHH Will, I thought that was the head site.

The LY heads are the best.

Here's a great write-up on heads

http://forums.hybridz.org/showthread.php?t=104420

Do a search for stroker on hybridz.org there's a ton of info there too.

Linda Lovelace.

Linda Lovelace.

I remember reading that she died in an automobile accident about 5 years ago. Besides, she'd be near 60 if she was still alive.

maxima n47 or a e30 from a jdm l20a got 2 any one wanna buy e30 go's for 1000

N47s are a dime a dozen (not literally but you know what I mean). I've got three of them in my garage plus the ones on my cars.

i prefer N42 for NA. gonna weld one up for more CR.

I remember reading that she died in an automobile accident about 5 years ago. Besides, she'd be near 60 if she was still alive.

Just close your eyes