Jump to content

IGNORED

What's its purpose?


twsutt

Recommended Posts

Okay, I'm reassembling things after replacing the bushings on a 1975 280z.

This piece fastens to the differential crossmember. It's made of 1/2" steel plates and weighs about 10 lbs. What's its purpose? Does it have a name? Is it necessary?

not to scale:

unknown.jpg

Link to comment
Share on other sites


That piece looks a bit different than the standard piece on the 240Z I'm accustomed to looking at which is a simple rectangular piece, but assuming it is connected to the bottom of the front diff member, it's the same piece and is a vibration damper designed to minimize the transfer of vibrations to the body caused by the drivetrain.

Link to comment
Share on other sites

Thanks =Enigma=.

Sorry about the illustration, but I'm drawing from memory and the last time I saw it was several days ago and I had been working past my bedtime.

I hate to admit it, but I kinda' forgot which way it's supposed to attach to the front diff. crossmember - does the "built-up" part face the front or back of the car?

Link to comment
Share on other sites

Good question. I'll have to leave this to one of our 280Z owners, however I'm not sure it would make much difference. If it were me, I'd put the large end towards the back.

Unless you have a good reason for wanting to remove it, I suggest you leave it in place. The official name is "PLATE DAMP DIFF MTG - RR".

The part number are as follows:

pre 12/74 = 55418-N3000

post 12/74 = 55418-N3701

Link to comment
Share on other sites

My 240Z in not an auto and I have one of these. I belive they were originally added to the 240Z as part of a multi part fix for the vibrations caused by the forward placement of the diff. This placement issue was later fixed by moving the diff back, but it seems the dampener remained for good measure.

Link to comment
Share on other sites

I'm the third owner of my Z, and as far as I know the 4-speed in the car is original equipment. I've looked through tons of pictures here and on HybridZ.com and on the few pics that show the front differential crossmember none have this dampener on them. In the case of my car, since it's not just something that a P.O. put on the car, but an actual Datsun part, it will go back on. Besides, it makes a great, solid jacking point. (I just hope that I can figure out which direction to face the darn thing.)

Link to comment
Share on other sites

I've got a 75 280Z with the OEM 4 speed and it has it as well. If I remember correctly the tall portion goes in the back. If nothing else see about lining up the holes with the bottom of the case...should only fit one way....Let me put that another way (LOL)...more than likely someone could probably install it wrong tho if they tried real hard...(LOL)

webdawg1

Link to comment
Share on other sites

Is this what you guys are talking about? (I'll be embarrast if it's not). When we bought my car several years ago, it was lying on the passenger side floor, and ever since I've always thought it was just some piece of medal welded up that the previous owners had left in the car as it doesn't look professionally made. For some reason I've kept it (not knowing why), but here it is. Is this crucial to have on the car if this is what you guys are talking about? Anybody have a picture of one mounted on their car? My car is a 4 speed by the way too.

mountmb3.png

mount2mh6.png

What's up with this?!?

Link to comment
Share on other sites

76Datsun280z,

Yep, you got it. That's the peice. Thanks for posting photos.

And I agree with you that it looks like a homemade part - it doesn't have the fit and finish that everything else on the car has.

Webdawg1,

I wish that it were as easy as just bolting it up the only way that works, but with two bolt holes-and nothing blocking the raised part on either side of the front differential crossmember-the part can be attached two ways (four ways actually, but we wouldn't even consider placing the tall part downward.)

Link to comment
Share on other sites

twsutt,

I'll check when I get home tonight and see if I can see the outline of when it was actually bolted up to the bottom. (Read lack of dirt/mud/dead bugs/vermits/and lots of grease) (LOL)

That's why I restated my comment about it being possible to install it wrong. (LOL)

webdawg1

Link to comment
Share on other sites

Austen,

I don't think that yours got bent, I think that they were put together haphazardly. Here's some pic of mine taken from the back of the car looking forward.

100_1616a.jpg

100_1614a.jpg

100_1612.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.