john mcgarvie

Some one installed what i can only describe as a optical censor and it works great.

I am not pointing out any one. I agree it is hard to understand when i type like that.I'm just saying just take it for what it is a mistake and move on.

I have never lubed a ball joint in a car in my life.Just my four Wheeler.That is not a good thing but it is the truth.I mean brand new i would say they will last just as long as the ones you can lube.

I take it allot of different markers will work.I guess i will pay the 2 dolors and go to the pick and pull and see what i can find.The markers blinking with the turn signals sounds good also.I have not got the necessary bod skills to lose the lights. And as for the spelling some of my posts are from my laptop and others are from my phone.I git a little carried away on my phone.But seriously there are allot of nice helpful people on here.I really appreciate all the help i have got. But there are also some busy bodies that have nothing better to do than act like my English teacher.

that sounds goot to ne one have ne pics that show the new flush mount lights on a car

I will check the laws but if i dont hafe to have them i think i will lose them

ok thankyou and good luck with rebuild

IM painting my 240z and im wondering i should take off the side marker lights.Dose ne one have ne pics with or with out marker lights.

Tell me if i need any work i will make another one this one is just a rough draft.

i put a 428 in a 69 fastback

1964.5 mustang i have a 65 and a 66 the 66 is the only one that will run ever again. I just want the first one.

yes .125 and i dont have first hand on this moter but i ran that in my truck for more than a year a dodge slant 6 and i hit it quite often the only thing that concerns me is the overhead cam

20wt and the best way to do the oil it a straw hold one finger over the end wen you git it in the oil it will stay till you git it in the su piston.

1.25 if only now and then

Well you did it you scared me im ordering a new chain,tensioner and runners.Wen i just put them together thay looket iffy.

thankyou thankyou

It could also be your heater blower going bad.

I have 4 marks on the pully .If you could just take some pictures.And if you could git the lengths from bend to bend and how wide it is. I can make it from that.

the notch is on the richt side at tdc where the bolt hole is on picture 1

ok the notch is straight up and is it ok to just hit it with the impact gun also im going to make a mark at tdc and if i advance my timing it should be 5degrees rite

here are some pictures of the problem.the first one is the missing marker off the right side.number 2 is the timeing markes on the left side. the third picture is the book showing the pic of the timeing mark .the last pic tels you a little more.

thank you i did look but i cant find the pointer.But i guess i can buy a newer pully ne ideas again not on ebay.

At tdc and timeing marks where thay go it runs good but the timeing marks show where the left side mark should go.

A pointy screwdriver.

you dont realy hafe to drop the sway bar you just hafe to spin the shaft with a scribe