I have a blown rear Tokico shock in my Ground Control sectioned coilovers. Problem is, Tokico shocks are no longer offered. I ordered a pair of Koni yellows for 240Z front ( front shocks are used in the rear of sectioned GC 240Z coilovers). The Konis are about 3/8 inches too tall and the gland nut won’t engage the threads in the top of the strut tube. If anyone has a Tokico strut laying around, or knows where I could find one, I would love to buy it. I can get by with one, but would like to replace both rears.

Thanks

Guy

Edited July 6, 20196 yr by Diseazd

Guy I have a few used Tokico struts laying around. Let me go see what PN's I have. 

Thanks Jim.....front or back....doesn’t matter.....just knock off the spacer on the rear.

A pair of HZ3012 and four HZ3038's. From a 76 280 apparently. I wonder if they fit in 2" tubes....

Edited July 7, 20196 yr by zKars

3015 or 3016 are the serial numbers for front and back.

The 3012 and 3038's are both 1.70 OD and  have 14-13/16" long bodies. All I got

Edited July 7, 20196 yr by zKars

3012 are the same as 3015.....according to an older thread. I’d love to have those two. 

Then they shall be yours.

I love this site!