I got the brake lights to work. Major accomplishment. I have 2 GR wires and 2 GB wires going to connector by column. Not on wiring diagram. Plus other wires not on diagram. Thank you.

Post photos that show the wires, connectors, and relative location clearly.

What about the fuse that keeps blowing?


Phil Smith

I don't know what I did but it's not blowing now. On top of the combo switch, H/L module, their are 2 black wires, 1 goes to the 6 pin connector, then is connected to a GY wire and then goes to the fuse box where there are 2 wires, GL and RL going to the same pin. I thought all black wires were grounds ? Thank you very much.

Here's a pic of connector with 2 GR and 2 GB wires. It's next to steering column by the other 6 pin connector. The 1 GB wire isn't very visible.

I am thinking it's for the turn signals, however, I'm not 100%. There shouldn't be a blue/white wire on that connector. The blue/white should be for the wipers.

Did someone do some creative wiring in the past?