Hey guys i got some fender mirrors i was woundering if any one knew the point where these are normally mounted.

also do any of you guys know where i can get a mirror fixed.

http://forums.hybridz.org/index.php/topic/50023-fender-mirror-install/

That's for a Z not a K though?

ok, the center of the big hole is 42 cm away from the far end of the chrome trim

the diameter of the big hole is 27 mm

the center of the small hole ( preventing mirror from spining ) is 39.5 cm away from the trim

the diameter is 7 mm

I took these measurements this morning from my scrap 1973 240k

Thanks mate i will give these measurements a look see, im just going to cover the whole top of the guard with 3m painters tap mark it all out and see what i think.

Cheers