okay. im getting ready to put a full 260z head on my l28.

the problem is that the mechanical fuel pump leaks fuel and oil.

my question is can i use just the stock electric fuel pump? or do i need anything else.

also, do they sell rebuild kits for the mechanical pump?

What are you doing ? If you are going to run carbs, you cannot use a fuel pump that is for injection. Too much pressure . I suppose you could use a pressure relief of some sort but if you just install a pump from a RX-7 Carbed car you will be fine . They put out about 5 psi.

oh.. ill be using the carbs... im just wondering if the 260z electric fuel pump (they came with 2 pumps) will work? if not.. that rx-7 one sounds sweet.

The 260 pump will do fine by it's self. Have you done the numbers ? since the longer stroke of the L-28 , what compression will you be running ?

really? the 260 electric pump will be fine?!

thats a camel off my back. hehe.

i dont know the comp, but until i can get a flattop block, its an n42 with a 74 e88 w/ 72' carbs.

i dont know the comp, but until i can get a flattop block, its an n42 with a 74 e88 w/ 72' carbs.

now i know i'm infected with the Z virus, cause i actually understand this sentence.

sorry to intrude,

bart

. thats great dude.

28oZ . You can send a PM to phred , He mostlikely can give you an idea of the comp ratio . mlc240z sorry some times we do take it for granted that others can understand this stuff . Yes You are infected . Gary

bean,

no need to be sorry, i was tickled by the Zvirus 33 years ago and finally 'welcomed' the full blown infection in 11-04.

bart

http://www.ozdat.com/ozdatonline/enginedesign/

Not hard to figure out compression (static).

Dave

Hey Ted. Look us up at centralfloridazclub@aol.com

hey 1st gen Z. do you know anyone with a good efi round port head?

where do you guys hang out? we gotta chill sometime.