Welcome Guest! Please read more information about our club!

Blog TheNateums

A blog by TheNateums in Member Blogs - Approved

Entry
1
Comments
0
Views
2923

Entries in this blog

My '71 240z!

This is my 240z. She is an 1971 so she doesn't need smog, so I removed all the emissions equipment day 1. Sadly this car is also kind of shared too, haha, my dad and I did all the work, him teaching me along the way. He put a lot into this car too so I consider it just as much his as it is mine. As Purchased: I got it for $1000, primer yellow, running, but barely, not drivable. Completely stock as far as I can recall. Needed a lot of cleaning up but was not necessary to do a hard core, tear i

0 Comments
1249 views

TheNateums
April 13, 201016 yr

Followers

Total Blogs 71
Total Entries 145

The Easy Button

Parman · July 1, 20251 yr

That's exactly what the problem was on my car. I had a puzzling oil leak, seep, about a tablespoon every 30 miles or so. Small spot under my car after sitting. I knew the leak originated near the fuel pump, but was fearing the worst, head gasket. This was one of the last of 25 pages of doing a search for "oil leak" that I read. Decided to go check those bolts, YES! I had loosened the bolt to adjust the alternator but forgot to tighten it. The others in the sane vicinity were a bit loose also. Took it for a drive, no more leak.
1
Cowl leaf screen

Guest Mike Piazza · April 25, 20251 yr

I didn't want to deal with silicon goop of any kind but my plan is to cut screen pieces slightly larger than the holes they are supposed to cover on the inside of the cowl and epoxy those small super strong magnets to strategic areas of the screen where they would fit flat against the underside of the cowl. More than strong enough to hold the screens in place and easily removable to get rid of stubborn leaf debris that might get stuck between the screen edges and the underside of the cowl.
Making an inspection light lens

EuroDat · March 15, 20251 yr

Hi Mike, Just back from a holiday in Spain. I have plenty of photo's and I believe I have a video of it bubbling to remove air. Ill see what I can find and post them.
Making an inspection light lens

Mike · March 10, 20251 yr

@EuroDat I know you made this blog awhile ago. But I am going through them and find this to be an interesting addition. Do you happen to have any photos you can add to this entry so we can keep it going?
Mike
1
Beats To The Rhyme

jamesp · September 11, 20197 yr

good idea to build in stages - get you Parts slowly and make it a dream come true

TZCC Monthly Members Meeting
TZCC Monthly Members Meeting

Come meet members, make friends, and talk about Z stuff. Food is good, and plenty of beer. Location and EXACT date announced on our Facebook page under Events. Date is typically 2nd Monday of the month.

11/09/26
- 0 comments

Blog TheNateums

Entry

Comments

Views

Entries in this blog

My '71 240z!

Blog Statistics

Blog Comments

The Easy Button

Cowl leaf screen

Making an inspection light lens

Making an inspection light lens

Beats To The Rhyme

Upcoming Events

TZCC Monthly Members Meeting

Images

Matsuo-san and me.jpg

Screenshot_20260111-081358.Chrome.png

Screenshot_20260111-081341.Chrome.png

Screenshot_20260111-081326.Chrome.png

Gateway Z club cruise

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)