Welcome Guest! Please read more information about our club!

Blog zorroo24

A blog by zorroo24 in Member Blogs - Approved

Entry
1
Comments
2
Views
2784

Entries in this blog

1977 280z fuel injector upgrade

I just inherited a 77 280Z non turbo 2X2. The car currently runs but needs some work done. After driving it around over the weekend, I noticed that the fuel injectors are old and leaking a little fuel, which at that point I parked it in the garage. I am planning on replacing the fuel pump and fuel injectors, but would rather upgrade these with some higher performance parts to get more power. Does anyone have any recommendations on what kind of injectors and fuel pump to buy to get more power tha

2 Comments
1353 views

zorroo24
March 23, 201016 yr

Followers

Total Blogs 71
Total Entries 145

The Easy Button

Parman · July 1, 20251 yr

That's exactly what the problem was on my car. I had a puzzling oil leak, seep, about a tablespoon every 30 miles or so. Small spot under my car after sitting. I knew the leak originated near the fuel pump, but was fearing the worst, head gasket. This was one of the last of 25 pages of doing a search for "oil leak" that I read. Decided to go check those bolts, YES! I had loosened the bolt to adjust the alternator but forgot to tighten it. The others in the sane vicinity were a bit loose also. Took it for a drive, no more leak.
1
Cowl leaf screen

Guest Mike Piazza · April 25, 20251 yr

I didn't want to deal with silicon goop of any kind but my plan is to cut screen pieces slightly larger than the holes they are supposed to cover on the inside of the cowl and epoxy those small super strong magnets to strategic areas of the screen where they would fit flat against the underside of the cowl. More than strong enough to hold the screens in place and easily removable to get rid of stubborn leaf debris that might get stuck between the screen edges and the underside of the cowl.
Making an inspection light lens

EuroDat · March 15, 20251 yr

Hi Mike, Just back from a holiday in Spain. I have plenty of photo's and I believe I have a video of it bubbling to remove air. Ill see what I can find and post them.
Making an inspection light lens

Mike · March 10, 20251 yr

@EuroDat I know you made this blog awhile ago. But I am going through them and find this to be an interesting addition. Do you happen to have any photos you can add to this entry so we can keep it going?
Mike
1
Beats To The Rhyme

jamesp · September 11, 20197 yr

good idea to build in stages - get you Parts slowly and make it a dream come true

TZCC Monthly Members Meeting
TZCC Monthly Members Meeting

Come meet members, make friends, and talk about Z stuff. Food is good, and plenty of beer. Location and EXACT date announced on our Facebook page under Events. Date is typically 2nd Monday of the month.

10/09/26
- 0 comments

Blog zorroo24

Entry

Comments

Views

Entries in this blog

1977 280z fuel injector upgrade

Blog Statistics

Blog Comments

The Easy Button

Cowl leaf screen

Making an inspection light lens

Making an inspection light lens

Beats To The Rhyme

Upcoming Events

TZCC Monthly Members Meeting

Images

Matsuo-san and me.jpg

Screenshot_20260111-081358.Chrome.png

Screenshot_20260111-081341.Chrome.png

Screenshot_20260111-081326.Chrome.png

Gateway Z club cruise

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)