SteveJ

If it doesn't it means you have some more wiring bugs to squash. Make sure you still have good voltage to ground on the black/white at the ballast resistor.

That's because it will be 18 years. 😉 According to your profile you joined in 2004.

I was on the big mailing list before I joined Mike's mailing list.

Thanks, Ron ( @zclocks). That makes a lot of sense to me, especially with my fail on the 200SX clock. I'll have to take another look at it. Are you interested in any photos of the guts of the 200SX clock?

Here's an interview with one of the ad creators: https://www.linkedin.com/pulse/joy-ride-story-most-loved-car-commercial-ever-made-rob-siltanen/

Sorry, it's not my write up. I have one of those clocks sitting on my parts shelves, waiting for me.

The 77 FSM does show the ballast resistor.

My family had a 68 Mustang when I was growing up, so I always had a special place in my heart for Mustangs, despite what idiots were doing at car shows. Back in 2011 when I wanted a new daily driver, I got the new Mustang with the 3.7L V6. It's a pretty good car, but it's no 68 Mustang. I appreciate it for what it is and for the honor it shows to the original. The new Z will never be like the old Z, but I like how it pays respect to the heritage. I also plan on judging it for what it is and not what cars once were. I think it could be a great modern driver in that respect. I'll also still enjoy driving the originals whenever I can.

So the white wire has the battery sensing voltage. It should have 12VDC to ground full time, so that's good. The black/white wire in the engine harness should have 12VDC to ground when the key is ON. It branches off the wire that goes from connector C-7 under the dash all of the way to the ballast resistor. Corrosion could have built up where Nissan spliced it into the wiring harness, but that seems strange for an AZ car. Just for fun, unplug the black/white wire from the condenser under the voltage regulator and test again at the voltage regulator connector and the bullet connector that was connected to the condenser.

Sorry, all I can provide is more reading material. At least the second link has someone describing his experience. https://www.hagerty.com/assets/PDF/DomesticShipping.pdf https://www.hagerty.com/media/advice/shipping-a-car-heres-how-and-why-to-make-the-right-choice/

No! That is not the right solution. Run the tests I posted. Figure out what is wrong and fix it. You will get better results.

I think I know what inspired the scammers to use the phrase "Hello buddy".

At least some of the scammers/spammers are nice enough to self-identify with the "Hello Buddy" post.

Yes, you should see 12VDC to ground at the white black white with the ignition on. To check, unplug the voltage regulator from the engine harness. Put the key in ON. Measure voltage to ground at the black/white wire on the engine harness. You should see 12VDC. With the VR unplugged, you can also use the ohmmeter function to measure resistance at the two pins marked below. There should be about 0 ohms (continuity). If the car will start and run, test the voltage at the battery with the car running. It should be running around 14 VDC or a little more. That is a better test.

I was asked to keep it quiet, but it is a classic Z color.

So they had the red and the grey Zs at Caffeine and Octane this morning. It was great to see them in person and sit in them. The wife wasn't thrilled with the seats, but I thought they should be a great incentive to me to lose some more weight. I found the ergonomics of the driver's position to be excellent. If you have a 370Z, you won't be surprised by much of anything on the interior. That's not a bad thing to me. I think the cars look very nice in person. I don't have a problem with the large mouth on the car, but I wouldn't mind if they put a vestigial bumper on it to break it up. My thought is that we can expect to see that on a refresh in the future. The Nissan people there want feedback. I was telling one of the product planning guys the color I was hoping to see for a Z. He hinted that if I'm patient, I will be rewarded. That's perfect because I'm not in a rush to join the current new car buying frenzy. If you want a gasoline powered Z, this may be the last model you can buy.

Not surprised about tonyd4. I reported his first post as suspicious.

The red Z will be at Caffeine and Octane in Atlanta tomorrow. Even the wife is willing to get up early to see it.

I'm not sure about the screw size/type, but I do suggest getting some JIS screwdrivers to reduce the chances of messing up the heads in future.

I'm in the NO RTV club. I worked on a guy's 280ZX turbo about a year ago. I was setting the valve lash for him. After that I was removing bits of RTV from the camshaft. Heaven knows how much got down into oil passages. Before putting on a new valve cover gasket, I thoroughly cleaned the mating surface on the head and valve cover gasket and sprayed out the valve cover to get more little bits of RTV out. Get a Nissan valve cover gasket. Line it up carefully. Don't over-torque the bolts when you put it on. Done.

Yep, I was thinking about our conversation about that when I saw jackmau's comment.

As long as it isn't from a 2+2

I did not find corresponding holes on the E88 head or N47 (Maxima) head on my cars. Sorry, I can't help you.

What holes are you referring to? A photo or two would help.