Everything posted by a7dz
- 
	
		
		08
		
		
From the album: Right frame
Doubler shown from wheel well - 09
 - 
	
		
		09
		
		
From the album: Right frame
Doubler screwed to inside firewall. - 07
 - 07
 - 
	
		
		10
		
		
From the album: Right frame
Firewall shown from engine bay. - 10
 - 
	
		
		right wheel weel
		
		
From the album: Right frame
Wheel well as parked in storage. - 
	
		
		right wheel weel
		
		
 - 
	
		
		right wheel well
		
		
From the album: Right frame
After cleaning - right
 - 
	
		
		right
		
		
From the album: Right frame
Rust cut away to match frame rail in engine bay - 
	
		
		right
		
		
From the album: Right frame
Doubler drilled off to show water trap - 
	
		
		unidentifiable wire in engine bay
		
		Go to the reverse light switch on my car.
 - 
	
		
		How often do you see 240-Z's on the road?
		
		Past six "Z" cars this past week. I expect to see them all hibernate for the winter. The weather was outstanding for Oct/Nov.
 - 
	
		
		Just purchased my first Z! '71 240z
		
		Welcome Brooks; I am not in Oregon but, do get down that way a couple of times a year. I am in the last stages of getting my 70 back on the road. Jim
 - 
	
		
		First De-Rusted Dogleg!
		
		I got the same story over two years ago. I bought them from Motor sport for less money. Had them in my hands less then a week later. Even had Tabco stickers on them.
 - 
	
		
		spindle pin -locking bolt
		
		You don't want it to turn it will wear the mating surfaces. I would suggest that you hone the arms so the pins slide in freely. I used a piece of scotch bright fastened in a piece of wire and my electric drill. This takes the corrosion out in just a matter of minutes.
 - 
	
		
		14 months later.
		
		The bumpers were replated by: Star Bright Chrome Plating Oregon City OR 97045 The wheels are Keystone. They have been on this car since it was new. If anybody has seen Keystone center caps I am still searching for replacements.
 - 
	
		
		14 months later.
		
		Another couple of steps closer. Picked up my bumpers last week from the chrome shop. My wife said " it is beginning to look like a car again. What do you think?
 - 
	
		
		Replacement hood
		
		I ordered the hood from a Nissan dealer. Walked in with the part number and they said they would have it in a week. Called me four days later and my brother stopped and picked it up for me. Owning the club CD on part numbers has paid off over and over again.
 - 
	
		
		Part # for 240Z windshield??
		
		I had the same luck getting mine out cracked top to bottom in the center. I will have mine installed in the next week. Let you know how it goes. Jim
 - 
	
		
		Your best
		
		
 - 
	
		
		Loose Timing Chain
		
		If you want your own here is a link to the manual on disk; http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=CD28075A
 - 
	
		
		power relay from 72 240Z - can't find one anywhere!!!!!!
		
		It controls the blower motor for heat and defrost along with the rear window defogger.