krZing

Yes clearance was done according to manual. Will check valve train Thanks Patcon

Noise is coming from cylinder #1 and when I pull plug wire 1 it goes away

Hello I need help with my 73 240z is this rod bearing issue or leaky valve or what? thank you for your reply E502C7F8-7113-47B5-89F7-7CD2B723F01B.MOV

I have decided to install it on the radiator hose with an adapter. I hope ? this will work

Hi 3w. This is what I have

Hi,I need help on how to wire my electric fan relay. Not sure where to connect sending unit from the relay to the thermostat housing. There’s only 2 holes in the thermostat. Temp gauge and cold start valve Connection in which is not being used. Can I use that for the sending unit? Thanks for the reply

That’s what I was trying to avoid. Thank you anyway.

Cg that sound so technical for no experience person like me. I I assume that wire maybe goes to the clutch

Sorry not pretty good on taking pictures. Here’s the retake .. Additionally the end of the wire has a fuse and a male connector.. thanks for the reply

Anyone have an idea?

Hello all. I recently removed the dash and fixed lighting issues with my ‘73 240z. All are fixed but now I can’t remember where this wire connected to. I took some pictures while dismantling the wirings but I left this one out. Can someone pls. tell me where this wire go. It is for the temperature control for the ac. Thanks

No worries ? thanks

Sorry. It is yellow/yellow and red

Hello everyone. I need help with this wire. not sure what where it belongs. ‘73 240z. Thanks

That's what I'm considering to do now. Hopefully I can find unmolested factory harness out there.Is there any difference between 72-73 harness? I saw this on ebay and it appears to be intact. with every ones expertise does it look complete. Need advise before buying it. thanks